Yaskawa Sigma-7 EtherCAT
EtherCAT is one layer of a Sigma-7 selection; safety and motor feedback are separate. The protocol name alone does not make two drives interchangeable.
Connections beyond EtherCAT
The network cable carries motion commands to the drive; motor power and encoder feedback use other connections. Servo safety may involve another option. “EtherCAT drive” therefore does not define the whole cable set or safety function.
Document the controller network configuration, complete drive model, motor feedback and safety circuit together. A drive appearing online on EtherCAT is not proof that the axis can move safely.
What matters in selection
An EtherCAT SERVOPACK still has motor-feedback and safety requirements beyond its network connection. Before substituting a same-protocol frame, verify the option set and both cable endpoints.
Even when EtherCAT commands arrive, check the motor feedback cable independently through Yaskawa Encoder / Terminal / Cable.
Technical references: Sigma-7 European catalog — V1_1215. For this family, use SERVOPACK drive manuals to identify the relevant document.
Models and technical distinctions
For shortened designations such as SGD7S-□□□AA0A: An abbreviated drive code is not a complete order variant; confirm supply and command suffixes on the nameplate.
| Model / frame | Documented distinction |
|---|---|
| SGD7S-□□□AA0A | EtherCAT application; communication and motor feedback remain separate checks. |