Yaskawa Safety / Feedback / Indexer

Safety, full-closed-loop feedback and Indexer are distinct functions. Module revision and supported SERVOPACK together determine system behavior.

An option changes what the axis can do

A safety module belongs to the stopping path; a full-closed-loop module reads an external scale; an Indexer runs a position sequence. Replacing one with another is a change in machine function, not merely a change in card number.

During fault finding, inspect the active alarm, external scale or I/O triggers according to the installed option. Safety circuits require the machine’s verification procedure rather than trial-and-error bypasses.

What matters in selection

Safety, external-scale feedback and Indexer modules solve different problems. Determine which function the installed axis uses and which drive revision supports that option.

The difference between an Indexer option and a network interface becomes clearer in Yaskawa Sigma-5 EtherCAT / Indexer.

Technical references: Sigma-7 European catalog — V1_1215.

Models and technical distinctions

Model / frameDocumented distinction
SGDV-OSA01ASigma-7 safety option; verify the supported safety function and drive revision together.
SGDV-OFA01ADocumented supporting component designation; verify the exact option suffix and supported system before replacement.
SGD7V-OCA03ASigma-7 Indexer module; not the standard drive itself.

Which tool serves which task?

What works with this component?