Yaskawa Sigma-5 CANopen

For CANopen, the drive and option module form a combination. Network profile and motor feedback compatibility are separate selection checks.

CANopen does not prove motor compatibility

CANopen describes command and status exchange between controller and drive. The servomotor encoder supplies a separate feedback path to the drive. Confusing the two can leave a unit visible on the bus while the axis still cannot run.

Establish the base drive, CANopen option and controller device profile as one set. Record existing node configuration, motor identification and feedback wiring before transferring parameters.

What matters in selection

For a CANopen machine, read the base drive, communication option and controller device profile as one installation. Motor-feedback compatibility remains a separate question from the fieldbus.

Even with a working CANopen bus, the encoder path may fail; Yaskawa Encoder / Terminal / Cable covers that separate connection.

Technical references: Sigma-5 CANopen technical manual. For this family, use SERVOPACK drive manuals to identify the relevant document.

Models and technical distinctions

For shortened designations such as SGDV-… / CANopen: An abbreviated drive code is not a complete order variant; confirm supply and command suffixes on the nameplate.

Model / frameDocumented distinction
SGDV-… / CANopenCANopen application; the drive and option code must be checked as a pair.

Which tool serves which task?

What works with this component?