6ES5 245-1AA12
Siemens 6ES5 245-1AA12 IP 245 proportional valve control module
6ES5 245-1AA12 is an IP 245 module for driving two proportional valves in Siemens SIMATIC S5 systems. It varies coil current in response to the valve command. Part records for the exact order number list a 24 V DC supply and S5-135/155 applications.
The Siemens ST 53 245-1AA family table lists an external −10 to +10 V setpoint input, a digital setpoint via the S5 bus and 0.1 to 1.2 A adjustable rated output current. These are family specifications. Match the wiring and settings to the machine drawing and the revision of the 1AA12 board.
OtomasyonAVM PDF archive
+ Siemens SIMATIC S5 manuals and PDF archive
Rack, supply and wiring
In a SIMATIC S5 system, identify the rack from its label. The S5-135U central controller, S5-135U/155U central controller and S5 rack pages help distinguish rack codes. If the board is in an expansion unit, also check the rack interface and slot assignment.
The Siemens S5-115U table calls for a fan and an adapter casing for the IP 245 family and lists 0.2 A on the internal 5 V rail. Compare the CR 700-2 rack, CPU 942 and S5 power supplies with the installation on site. The table describes mounting at family level.
The ST 53 drawing groups valve outputs, setpoint inputs and feedback inputs separately. Match the cable and front connector to the cabinet drawing. If the installation uses an external setpoint, check the signal type of the connected analog module. Trace the 24 V supply and the controlled coil current separately in the wiring diagram.
Matching the order number
6ES5 245-1AB12 is the servo-valve version. The 1AA12 is the proportional-valve version. Record any IP 252 3AA11, IP 252 3AA13, IP 262 K-type or IP 262 S-type boards separately under S5 function modules. The S5 positioning modules, IP 246I and IP 242A counter pages help identify the motion and counting cards.
Editor’s note
1. Ask for photos showing the 1AA12 label, hardware revision and front connector before ordering a spare.
2. Record the valve label and rated coil current. Photograph the existing settings before removal.
3. If the valve does not respond, identify the command source first. Trace the 24 V supply, setpoint and valve output separately on the cabinet drawing.
4. If one direction responds weakly, check its coil and cable. Have the corresponding output current checked during the bench test.
5. For a used board, ask for a test record for both valve channels, including the load, command source and measured current.
Buying or selling a used module
For a quote, share a label photo, quantity and operating condition. Confirm pricing and bench-test arrangements with the quote. To sell a module, email otomasyonavm@gmail.com.
Related topics
+ IP 245 servo-valve version 6ES5 245-1AB12
+ SIMATIC S5 analog input and output modules
Second-hand Siemens
External references
+ Siemens ST 53, p. 8/15 — IP 245-1AA family specifications
+ Siemens ST 53, p. 8/26 — IP 245-1 family connection drawing
+ Siemens S5-115U manual, p. 15-58 — fan and adapter table
+ ADEGIS — exact order number and 24 V supply