6ES5 955-3NC13
Siemens SIMATIC S5 6ES5 955-3NC13 PS 955 Power Supply
The Siemens 6ES5 955-3NC13 is a PS 955 rack power supply for the SIMATIC S5 S5-135U central controller and the EU 183U and EU 185U expansion units. It takes 24 V DC from the cabinet supply and delivers 5 V DC at 18 A to the rack backplane. Siemens specifies 5.1 V DC ±0.5% as the nominal value for the 5 V rail.
In the central rack, the PS 955 powers the CPU and module electronics. In an expansion rack, it powers the electronics in that rack. The EU 183U and EU 185U rack families were offered with different power supplies. Check the full rack number when sourcing a spare. The 6ES5 955-3LC14 is also rated at 18 A, but takes AC input. The 6ES5 955-3NF11 takes 24 V DC and is rated at 40 A.
The 5 V rail and auxiliary outputs
Siemens specifies an input tolerance of +25% / −17% on the 24 V DC supply. The 5 V rail feeds the rack electronics. When comparing S5 power supplies, note that the 6ES5 955-3NA12 has a 10 A rating on its 5 V output. To calculate the rack load, add the 5 V current figures from the data sheets for the installed S5 modules.
Auxiliary output 2 is rated at 24 V DC / 0.8 A, and the front-panel 24 V output is rated at 0.4 A. The 6ES5 956-0AA12 add-on module provides a 15 V DC / 0.5 A output when fitted. The combined current limit is 0.8 A across the auxiliary 24 V, front-panel 24 V and optional 15 V outputs. If the rack has a CP 535 communications processor, record whether the 15 V module is fitted before removing the supply.
Rack identification and similar PS 955 units
Siemens lists the 3NC13 with the 6ES5 135-3UA31 central controller. The 6ES5 135-3UA11, 6ES5 135-3UA21 and 6ES5 135-3UA41 use other supplies in the same ordering table. On expansion units such as the 6ES5 183-3UA13 and 6ES5 183-3UA22, check the full rack number alongside the label on the installed supply.
The Siemens product description for the 6ES5 955-3NC12 lists the S5-135U and EU 183U. The 3NC13 also lists the EU 185U. The 3NC41 and 3NC42 have the same 24 V DC input and 5 V / 18 A ratings, each with its own order number. The 6ES5 955-7NC11 is a 14 A unit for the S5-155H. Use the full order number, rack type and connection layout when matching a replacement.
Connectors and power-up indicators
On the S5-135U, the 8-pin X1 connector carries power to the backplane. The 37-pin X2 connector carries signals. See Figures 17 and 19 in the Siemens manual for the rear connector layouts.
The green Power Supply O.K. LED indicates that the 5 V output is present. If Fan Fault lights up, check both fans and the airflow path. The F–R jumper determines whether a fan fault shuts down the 5 V output. If the rack has a filter holder, include it in the airflow inspection.
Voltage Low refers to undervoltage at the external load-voltage monitoring input. Read it separately from the 5 V status indicator. If the 5 V rail remains stable, use the SIMATIC S5 system layout to narrow the fault down to the affected CPU, expansion unit or power feed.
Editor’s note
Photograph the 3NC13 suffix and the full rack label together. Both are worth having when you need a spare for an EU 185U.
Before removing the supply, verify the STEP 5 project backup and the RAM battery backup. If Batt. Low is on, check the CPU manual for the memory retention procedure before isolating power.
With power isolated, record the plugs, jumper positions and whether the 15 V add-on module is fitted. Check the replacement setup against the rack wiring diagram.
If the rack starts and shuts down a few seconds later, watch for Fan Fault before the output drops. Check the recorded F–R setting when interpreting what happened.
For a used unit, ask for a 5 V reading under load, confirmation that both fans run and the auxiliary output test result. If you have a unit to sell, email a label photo, quantity, known condition and asking price to otomasyonavm@gmail.com.
OtomasyonAVM resources and PDFs
+ About Siemens SIMATIC S5 PLCs
+ SIMATIC S5 power supply models
+ Siemens SIMATIC S5 manuals and PDF archive
Related topics
+ 6ES5 955-3NC12 PS 955 power supply
+ 6ES5 955-3NC42 PS 955 power supply
+ 6ES5 955-3NF11 PS 955, 5 V / 40 A
Browse SIMATIC S5
+ Used Siemens automation equipment
External references
+ Siemens S5-135U system manual · 3NC13 technical data, Section 6.4, pp. 55–56 (EN)