6ES5 955-3NA12

Siemens 6ES5 955-3NA12 SIMATIC S5-135U power supply

The 6ES5 955-3NA12 is a Siemens 955 power supply for the SIMATIC S5-135U central controller. It takes 24 V DC and delivers 5.1 V DC at 10 A to the rack backplane. Siemens manual C199-07 specifies a combined 0.8 A limit for the 24 V rails and a 0.4 A rating for the front enable supply. The primary and secondary circuits use a non-isolated design.

In a SIMATIC S5 installation, this unit powers the CPU and the modules on the central backplane. Trace the 24 V supply to field devices on the digital inputs and digital outputs separately in the cabinet drawings. For S5 communications hardware that uses SINEC H1, an auxiliary submodule in the PSU provides 15 V DC at 0.5 A.

Input ratings and backplane connections

The input range is approximately 20–30 V DC (+25% / −16.66%). The supply draws 4.8 A at rated load and 24 V DC, with a specified 100 A peak inrush. Siemens specifies a 6 A fast-acting input fuse and a 1.5 A fast-acting fuse for the 24 V backplane output. Both are 250 V, 6.3 × 32 mm.

Follow the Siemens protective grounding arrangement for the PE conductor and the bond between the rack and PSU front plate. When identifying the S5 connectors, use 8-way X1 for the 5 V power connection and 37-way X2 for the signals and auxiliary rails. The manual shows both connectors on page 11-10.

Matching the rack and the 955 order number

Siemens pairs this supply with the 135-3UA41 in section 4.4 and the 135-3UA42 in section 4.1. The 3NA11, 3NC12 and 3NC13 have separate order numbers. The same manual pairs the 6ES5 188-3UA32 rack with the 18 A 3NC42. The 3NF42 is the 40 A version. Match the rack nameplate and backplane connections when selecting a spare.

If only an S5 expansion rack is affected, trace its supply and the link between the interface modules separately. If the CPU also shows a power fault, start with the 5 V status on the central rack.

Reading the front-panel indicators

The Power Supply o.k. indicator monitors the 5 V output, rated at 5.1 V DC ±0.5%. The backplane 15/24 V supply and the front 24 V output have their own indicators. Record all three states during PLC fault finding. Check the UH–EN circuit against the cabinet drawing if the supply is failing to enable.

Fan Fault indicates loss of airflow from one or both axial fans. With jumper F-R closed, a fan fault shuts down the 5 V rail. If Batt. Low is lit, verify the STEP 5 project backup before a shutdown and identify which data is held in CPU RAM and which is on the S5 memory card. The backup circuit uses a lithium battery or the 3.4 V DC external backup supply specified in the manual.

Editor’s note

When sourcing a spare, record the 955-3NA12 label, hardware revision and full rack order number together. Photograph the connector and fan sides as well.

If the supply drops out at startup, have qualified maintenance staff capture the 24 V input during switch-on. An input that looks fine at idle can sag during inrush.

If 5 V is indicated but the 15/24 V LED is dark, troubleshoot the 24 V branch separately. Isolate power before checking its fuse and auxiliary supply connections.

When Fan Fault lights, inspect both fans and the air path. Compare the F-R jumper with the recorded setting and resolve the fan fault before returning the rack to service.

If Batt. Low is lit, confirm the RAM backup before a planned shutdown. For a used unit, ask for a test record showing the 5 V rail under load, both fans running and the alarm indicators.

OtomasyonAVM resources and PDFs

+ 6ES5 135-3UA41 S5-135U central controller

+ About Siemens S5 PLCs

+ SIMATIC S5 PDF archive

Related topics

+ 6ES5 955-3NA11 power supply · 6ES5 955-3NC42 power supply · 6ES5 188-3UA32 central rack

Browse Siemens S5

+ SIMATIC S5 power supplies · SIMATIC S5 · Siemens S5 PLCs · Used Siemens automation equipment

Selling one of these units? Send a label photo, quantity, operating condition and asking price to otomasyonavm@gmail.com.

External references

+ Siemens SIMATIC S5-135U/155U System Manual, C199-07 · Section 4.4 covers the exact model, pages 4-68 and 4-69 give the ratings, and page 11-10 shows the connectors.

+ Siemens S5-135U CPU 921/922 Manual, 6ES5 998-0UL22 · Table 1 identifies the 135-3UA41 rack and power supply combination.