6ES5 955-3NC12

Siemens 6ES5 955-3NC12 SIMATIC S5 PS 955 Power Supply

The Siemens 6ES5 955-3NC12 is a fan-cooled PS 955 power supply for the S5-135U central controller and EU 183U expansion unit. It takes a nominal 24 V DC input and supplies 5 V DC at 18 A to the SIMATIC S5 rack. Siemens specifies a minimum load of 1 A on the 5 V rail for proper start-up and fan supply operation.

The PS 955 powers the modules fitted in the S5 rack. If the central rack and the rack carrying the S5 expansion modules have separate supplies, establish which rack drops out first. Trace the DC Line input, the internal 5 V rail and the external 24 V load-voltage monitoring circuit separately on the machine drawing.

How does the 3NC12 compare with other PS 955 versions?

The 3NC12 takes 24 V DC. The similar-looking 6ES5 955-3LC13 takes AC. Other DC-input versions include the 6ES5 955-3NA12, rated at 5 V / 10 A, and the 6ES5 955-3NF11, rated at 5 V / 40 A. Check both the input type and output current when comparing S5 power supply models.

The 6ES5 955-3NC13, 6ES5 955-3NC41 and 6ES5 955-3NC42 have similar order numbers. Before selecting a replacement, compare the rack code, front terminal functions, fan assembly and monitoring circuit. The Siemens specification tables for the 3NC13 and 3NC42 apply to those individual versions.

Which rack loses power first?

Siemens documents different power supply options for S5-135U central controllers such as the 6ES5 135-3UA11 and 6ES5 135-3UA21. The EU 183U also has several chassis order numbers, including 6ES5 183-3UA12 and 6ES5 183-3UA22. Record the full chassis and power supply order numbers separately on the service ticket.

If the central rack runs while the expansion rack stays down, start with the expansion rack’s own supply and cooling. Once its power is confirmed, check the inter-rack link and the S5 interface modules. If the drawing shows an IM 300 or IM 301, confirm the full order number from the fitted module’s label.

Front-panel test points and indicators

The Test 5 V point is used to check the internal supply voltage. The 3 V = 18 A marking gives the scale for the output-current monitor. Refer to the applicable Siemens front-panel drawing to identify the test points.

Record the fan-fault, low-voltage and power-supply status indications separately. Use the machine drawing to distinguish the external 24 V monitoring circuit from the internal 24 V connections and the 15 V option, where fitted. The EU 183U service documentation lists 6ES5 988-3NB11 as a spare fan set for the 3NC12 and the 6ES5 988-3NA11 fan unit.

Editor’s note

Photograph both nameplates. Put the full rack order number and the 3NC12 suffix on the same work order. Use the photos to compare the input label and front connections with the replacement unit.

Mark the connections before removing the unit. Follow the site’s electrical isolation procedure. When labeling the S5 cables and connectors, identify the 24 V input, monitoring terminals and any external backup supply separately.

Apply the minimum load during bench testing. Meet Siemens’ 1 A minimum load on the 5 V rail before assessing start-up, the 24 V section or the fan supply.

Check cooling if the rack drops out after warming up. Record the indicators at the time of failure. After safe isolation, inspect the air inlet, any filter and the fan connections.

Verify the backup before working on the central controller. Record the fitted S5 memory card and battery backup arrangement. On installations with a CPU 921 or CPU 922, confirm that the program and required machine data can be restored.

OtomasyonAVM resources and PDFs

For a family overview, see About Siemens S5 PLCs. The SIMATIC S5 central controllers page helps identify rack and CPU models.

Browse the OtomasyonAVM Siemens S5 PDF archive for other S5 manuals. For EU 183U installation and service information, use the Siemens U Periphery manual under the external references below.

Related topics

PS 955 3NC13 · PS 955 3NC42 · PS 955 3NF11 · S5 988-3NA11 fan unit

S5 navigation

Siemens S5 PLCs · SIMATIC S5 power supplies · S5 racks · S5 expansion modules

Siemens and other external references

Siemens SINUMERIK 850 commissioning instructions, section 4.5.3 (German, 3NC12 front panel and minimum load)

Siemens SIMATIC S5 U Periphery, EU 183U operation and spare parts (English)

Siemens S5-135U CPU 921/922 system manual (English, power supply options)

PLC Hardware 6ES5955-3NC12 product record (Exact order number, input, output and rack application)