6ES5 955-3LC14
Siemens 6ES5 955-3LC14 SIMATIC S5 PS 955 Power Supply
The Siemens 6ES5 955-3LC14 is a PS 955 rack power supply for SIMATIC S5-135U systems. It has a selectable 120/230 V AC input and supplies 5.1 V DC at 18 A to the main rail. Siemens pairs this order number with the 6ES5 135-3UA11 central controller. Siemens peripheral manuals also list this supply for the EU 183U and EU 185U.
The unit supplies the CPU and modules in the S5 rack from the 5 V rail and provides a 24 V output for auxiliary circuits. In the same PS 955 power supply range, the 6ES5 955-3LF12 is a 40 A AC-input variant, while the 6ES5 955-3NC13 is an 18 A model with a 24 V DC input.
AC input and auxiliary output ratings
The S5-135U technical table specifies an input frequency of 48–63 Hz. At rated load, input current is 1.25 A at 230 V or 2.5 A at 120 V. The expansion unit manuals label the lower setting 115 V. The S5-135U manual calls it 120 V. Check the actual unit’s nameplate and selector before installation.
The rear 24 V DC output is rated at 0.8 A and the front 24 V DC output at 0.4 A. The two 24 V outputs and the 15 V auxiliary output, if fitted, have a combined limit of 0.8 A. The front output’s 0.4 A counts toward that limit.
Siemens lists 15 V DC at 0.5 A for the 3LC14 with the supplementary module fitted. If the rack uses an S5 communications module such as the CP 535, check the rack’s 15 V configuration and the total auxiliary load together.
Rack order numbers and the 3LC41 / 3LC42 variants
In the S5-135U manual, Siemens pairs the 135-3UA11 with the 3LC14 and the 6ES5 135-3UA21 with the 40 A 3LF12. On the expansion side, the 6ES5 183-3UA12 and 6ES5 185-3UA11 have distinct rack order numbers. When sourcing a spare for a 183U or 185U system, read the complete rack and power supply nameplates.
The 6ES5 955-3LC41 and 6ES5 955-3LC42 are also 18 A AC-input models. Later Siemens manuals list a 1 A rating for the 24 V output on those variants. On a rack such as the 6ES5 183-3UA13, check the manual edition against the suffix of the fitted supply.
Front-panel checks for a rack fault
The Test 5 V sockets show the output voltage. The point marked 3 V = 18 A represents load current on the 5 V rail. Siemens specifies two axial fans with airflow monitoring. Depending on the F–R jumper setting, a fan fault can trigger an alarm or also shut down the 5 V output.
If several S5 expansion modules drop out together, check the common rack supply and the status of the rack interface modules. At the central rack, record the supply indicators alongside those on the SIMATIC S5 CPU. The Siemens S5 system overview shows how the racks fit into the system.
Editor's note
Read the suffix from the nameplate. The 6ES5 955-3LC12, 6ES5 955-3LC13 and 3LC14 have similar order numbers. Keep photographs of both the rack and supply nameplates in the service record.
Verify the voltage selector. With the unit isolated, have a qualified technician check the 120/230 V setting against the cabinet supply before commissioning. Check it again when the spare came from another cabinet.
Record the auxiliary loads together. Note the front output load, the rear 24 V load and the 15 V module, if fitted. Assess their combined current against the 0.8 A limit.
Check the fan part number. Siemens lists the 6ES5 988-3LB21 two-fan replacement kit for the 3LC14. The complete 6ES5 988-3LA11 fan chassis used in the EU 184U rack has its own order number. Isolate power and record the F–R setting before removing the supply.
Check the hardware version when tracing a battery alarm. Siemens specifies that from hardware version 7, RR–LL can add a battery fault to the signalling relay. Verify the program backup and battery condition before powering down the rack.
Ask for the load used in a second-hand test. For a used Siemens automation offer, ask for a clear nameplate photo, a 5 V measurement under load and the condition of both fans. To sell a unit, email the full order number, quantity, condition, nameplate photo and asking price to otomasyonavm@gmail.com.
OtomasyonAVM resources and PDFs
6ES5 135-3UA11 S5-135U central controller
Siemens S5 system overview and manuals
OtomasyonAVM SIMATIC S5-115 PDF library (S5-115 family)
Related topics
6ES5 955-3LC41 · 18 A AC-input power supply
6ES5 955-3LC42 · 18 A AC-input power supply
6ES5 955-3NC13 · 18 A power supply with 24 V DC input
Browse the S5 range
Siemens SIMATIC S5 PLC › S5 power supplies
External references
Siemens S5-135U manual, 3LC14 technical specifications, section 6.1
Siemens S5-135U manual, jumper table and 3LC14 layout
Siemens U periphery manual, EU 183U and 3LC14 technical data