6ES5 375-1LA15
Siemens 6ES5 375-1LA15 SIMATIC S5 CMOS EPROM Memory Submodule, 8 KB
The Siemens 6ES5 375-1LA15 is a 375-series CMOS EPROM memory submodule for SIMATIC S5. It holds 8 KB (8,192 bytes) and retains the programmed contents without power. Siemens lists this order number for the S5-95U, S5-100U and S5-115U. The S5-100U accessories table rates it at 4,096 STEP 5 statements.
In an S5 CPU socket, the submodule holds the STEP 5 program. The same part also stores processor-specific data in certain S5 communications processors. Record the socket the submodule came from and keep the EPROM readback separate from the current CPU program.
Supported CPUs and communications processors
Appendix D of the S5-100U manual lists this submodule alongside the CPU 100 8MA02, CPU 102 8MA02 and CPU 103 8MA03. EPROM capacity and internal CPU program memory are separate specifications. Check the combined size of the blocks against the limit of the installed CPU.
The S5-95U manual lists the 1LA15 for the family that includes the 095-8MB03 with SINEC L2. Table 2-8 of the S5-115U manual marks the CPU 941, CPU 942, CPU 943 and CPU 944 columns. Siemens also lists this EPROM in the manuals for the S5-95F 095-8FB01 and the S5-115F CPU 942-7UF15.
On the CP 521 SI 8MA21 and CP 521 SI 8MA22, the submodule can hold parameter data and text for printing. The CP 521 BASIC manual also lists the 1LA15 as a 1 × 8 KB EPROM. Keep separate backups for the CPU program and the CP contents.
PG programming and UV erasure
Write the EPROM using a compatible Siemens programming device (PG). Before reusing a programmed submodule, back up its contents and clear it with a UV eraser. After programming, read the EPROM back and compare it with the source.
The Siemens S5-95F, S5-115F and CP 521 SI tables assign programming number 411 to the 1LA15. Table 2-8 of the S5-115U manual prints 11 against the same order number. Before writing, check the complete order number on the label against the module table for the PG and STEP 5 version in use.
Identifying similar memory submodules
The 375-0LA15 is also an 8 KB EPROM. The S5-115F table assigns that model programming number 11. In the CMOS EPROM range, the 375-1LA21 holds 16 KB and the 375-1LA41 holds 32 KB.
The 375-0LC31 is an 8 KB EEPROM, the 375-0LC41 is a 16 KB EEPROM and the 375-0LD11 is an 8 KB RAM submodule. The S5-100U manual describes the COPY backup from CPU to installed submodule for EEPROM.
Editor’s note
Read the suffix on the label. The 1LA15 and 0LA15 have the same capacity. Photograph the order number before choosing a module on the programmer.
Back up the running program. Retrieve the CPU blocks with the appropriate S5 programming cable. Record the machine and socket against the EPROM backup file.
Switch off the equipment before removal or fitting. Record the submodule’s orientation and socket. Inspect the contacts and socket before inserting the EPROM.
Verify the backup before using COPY on an S5-100U. Manually loading the EPROM into the CPU overwrites the existing CPU program. Check the EPROM for the expected blocks on the PG first.
Use the approved program on F-series controllers. The S5-95F manual requires two submodules with the same order number. After replacement on an F-series controller, follow the site’s verification procedure for the safety application.
OtomasyonAVM resources and PDFs
SIMATIC S5 memory submodules · About Siemens SIMATIC S5 PLC systems
OtomasyonAVM SIMATIC S5 PDF manual archive
Related topics
375-0LA15 8 KB EPROM · 375-1LA21 16 KB CMOS EPROM · 375-0LC31 8 KB EEPROM
Browse SIMATIC S5
Siemens SIMATIC S5 · S5 memory cards · SIMATIC S5 CPUs
Siemens and other external references
Siemens 6ES5 375-1LA15 data sheet (Order number, CMOS EPROM and capacity)
SIMATIC S5-90U/S5-95U System Manual · SIMATIC S5-100U System Manual · SIMATIC S5-115U memory submodule table
SIMATIC S5-95F Manual, Table 2-8 · SIMATIC S5-115F Manual, Table 2-3
SIMATIC S5 CP 521 SI memory submodule table · SIMATIC S5 CP 521 BASIC Manual, Table 2-2