Delta AS64AM10N-A
Delta AS64AM10N-A 64-channel digital input module
The Delta AS64AM10N-A adds 64 digital inputs rated at 24 V DC to a Delta AS PLC system. This Delta AS digital module reads multiple sensors, pushbuttons and limit switches from a single module.
Input groups and MIL field wiring
The inputs are split across two 40-pin MIL connectors, with 32 channels on each. The nominal input current is 4.2 mA per channel. For PNP or NPN sensors, match the input group’s S/S common to the Delta wiring diagram. See sink/source wiring and digital inputs for background.
Use the 40-pin MIL cable options UC-ET010-24B (1 m), UC-ET020-24B (2 m) or UC-ET030-24B (3 m) with the 32-input UB-10-ID32A terminal block. The front switches select which X0, X1, X2 or X3 group the LEDs display. See AS power supplies and AS expansion modules when planning the system.
ISPSoft, input mapping and programming cable
Place the module in its physical position in HWCONFIG in ISPSoft. Verify the starting input address and filter time in the project. Delta specifies an input filter range of 0–25 ms, with a 10 ms default. Check the pulse width of fast field signals when choosing the filter setting.
The PC connects through the CPU. Choose the COMMGR channel for the exact AS200 or AS300 CPU. Use a Mini USB data cable or an RJ45 Ethernet cable as supported by the CPU port. See Delta PLC cables and PLC programming for connection details.
Editor’s Note
When buying used, verify the complete AS64AM10N-A code on the label.
Inspect the pins and latches on both MIL connectors.
If a cable and terminal board are included, ask for both part numbers.
Record the S/S groups and existing input addresses before removing the field wiring.
On the bench, test one input from each LED group and confirm the result in ISPSoft.
Related topics
AS08AM10N-A (8 inputs) · AS16AM10N-A (16 inputs) · AS32AM10N-A (32 inputs) · AS64AN02T-A (64 NPN outputs)
Delta PLC and HMI manuals · Delta PLC · Used Delta equipment
External references · AS Module Manual, Chapter 2 (EN) · AS64AM10N-A instruction sheet (TR/EN)