6ES5 441-5AA12

Siemens 6ES5 441-5AA12 — 16-Channel 24 V DC Digital Output Module

The Siemens 6ES5 441-5AA12 is a 16-output, 24 V DC/0.5 A, non-isolated digital output module in the SIMATIC S5 family. This rugged Robustbauform board is listed in Siemens ST 53 for S5-130A and S5-150A central controllers.

Supply and channel loading

The permissible supply range is 20–30 V DC; ON-state load current is 5 mA–0.5 A. Assess the 24 V DC power supply and field loads together. The per-channel current rating does not mean every output can carry its full load at every temperature.

Temperature and switching limits

Total loading at 55 °C is limited to 50% of the sum of all nominal output currents. This gives 16 × 0.5 A × 50% = 4 A total. Maximum switching frequency is 100 Hz for resistive loads and 2 Hz for inductive loads at nominal loading; assess relay and contactor coils accordingly.

Protection and OFF-state behaviour

The board provides electronic short-circuit protection. Maximum OFF-state residual current is 0.5 mA. Check external fuses and field wiring against the existing project's protection arrangement.

Two eight-output supply sections

The rugged wiring diagram shows two L+ supply sections for outputs 0–7 and 8–15. These are not galvanically isolated output groups. Match the front connections and cabling to the manufacturer drawing, checking the existing S5 rack layout and terminal markings. Disconnect PLC and field supplies before working on the board or front connections.

Address and command checks

The wiring drawing represents the 16 outputs as two bytes. Verify the actual starting address in the existing project. Compare the PLC input/output arrangement with the PLC program to confirm that each command reaches the intended physical channel.

Fault finding

During debugging, check the command, affected section's supply and load in sequence. Interpret multimeter readings alongside behaviour under load. With non-isolated hardware, review grounding and the common reference arrangement when investigating electrical interference.

Comparison with related models

The 6ES5 451-5AA13 also has 16 outputs rated 0.5 A, but provides galvanic isolation. The 6ES5 444-5AA11 is a non-isolated 16-output/2 A model. The 6ES5 450-6AA12 has 32 outputs rated 0.12 A and is isolated. Check channel count, loading and isolation before choosing a replacement.

Editor's note

Keep in mind that this board has 16 outputs and no galvanic isolation. Take a moment to read the full order code before borrowing the wiring arrangement from another 441 board.

If one eight-output section stops working, first check its L+ supply and the load return path. A missing supply should not lead to setting aside an otherwise sound board.

Each channel is rated 0.5 A, but the board's total load limit at 55 °C is 4 A. In a warm cabinet, counting and measuring the connected loads will tell you more than guessing.

Ask for a photograph of the front connections when buying a spare. A similarly named board such as the 441-7LA11 still needs its mechanical and electrical suitability checked before installation.

When testing a used board, check every channel in both eight-output sections with suitable loads. Keep a short test record with the S5 system information to make the next maintenance visit easier.

OtomasyonAVM resources and PDFs

+ Siemens S5 pages and the OtomasyonAVM S5 PDF archive.

+ Siemens ST 53 — 1985, German: technical table 8/6, rugged wiring diagram 8/21 and exact 441-5AA12 ordering entry 9/6.

Related topics

+ 451-5AA13 · 444-5AA11 · 450-6AA12 · 441-7LA11.

Browse SIMATIC S5

+ S5 digital output modules · SIMATIC S5 central controllers · Siemens S5 · Used Siemens equipment.

Siemens and external references

+ Siemens ST 53 — Automatisierungsgeräte S5-130 und S5-150, 1985: externally archived German-language manufacturer catalog. PDF pages 92, 107 and 124 cover the 441-5 technical table, wiring and exact order code.