6ES5 951-7NB13
Siemens 6ES5 951-7NB13 SIMATIC S5 PS 951 Power Supply
The Siemens 6ES5 951-7NB13 is a PS 951 rack power supply for SIMATIC S5-115U and S5-115H systems. It takes a 24 V DC input and delivers 5 V DC at 3 A to the system rail. Siemens lists no galvanic isolation between the 24 V input and the 5 V output on this model.
The PS 951 power supply feeds the CPU and the internal control electronics of the cards in the S5 rack. The field circuits of digital input modules, loads connected to digital output modules, sensors and actuators are accounted for separately in the load supply. The 3 A rating applies to the 5 V rack rail.
24 V input, 5 V output and rack current budget
Siemens specifies that the 7NB13’s 5 V reference is permanently connected to the rack. Check the cabinet drawings for the 24 V supply, reference and earthing arrangement. Add the 5 V current draw of the CPU and fitted cards and check the total against the 3 A rating.
The 6ES5 951-7NB12 and 6ES5 951-7NB21 are related 3 A models with a 24 V DC input. The 6ES5 951-7LB21 is a 3 A model with an AC input. Compare the full order number, input type and installed cards when selecting a spare.
DSI signal and module compatibility
The 7NB13 does not generate the DSI signal. Siemens therefore excludes IP 246, IP 247 and CP 513/526/527/535/580/581/143 from use with this supply. If the rack contains a CP 535 or another S5 communications module, start with the full order number on the card.
The CP 524 and CP 525 have a separate restriction. Siemens excludes them from 3 A supplies because of their current draw. Check total current and DSI requirements independently when assessing a replacement.
Identifying the rack and installed CPU
The S5-115U manual shows the CR 700-0LA12 for compact systems, the CR 700-1LA12 for small to medium layouts, and the CR 700-2LA12 for larger 19-inch installations. If the system uses a CPU 944 or CPU 945, record the full order numbers of both the CPU and the rack. The Siemens S5 system overview links to rack and CPU documentation.
Editor's note
Read the 7NB13 suffix on the nameplate. Parts records list the 7NB21 as its successor. When replacing the unit, check the fitted modules, connections and battery arrangement against the documentation for each model.
Separate a rack supply fault from a field load fault. If the CPU and several cards drop out together, have a qualified technician check the PS 951 input under load and the status of the 5 V rail. Record field output faults separately.
Update the current budget when the rack changes. If a card has been added, include its current draw. For a different capacity model such as the 6ES5 951-7ND41, check its own rack and cooling requirements.
Check the program backup and battery separately. The 7NB13 parts record lists the unit as supplied without a backup battery. Before isolating power, check the installed battery and S5 memory arrangement and verify the program backup.
Ask how a used supply was tested. For a used Siemens automation offer, ask for a clear nameplate photo and the load at which the 5 V rail was measured with a 24 V DC input. To sell a unit, email the full order number, quantity, condition, nameplate photo and asking price to otomasyonavm@gmail.com.
OtomasyonAVM resources and PDFs
Siemens SIMATIC S5-90U/115U CPU and system pages
OtomasyonAVM Siemens S5-115 PDF library
SIMATIC S5-115H system manual (PDF)
Related topics
6ES5 951-7NB12 · 24 V DC input, 3 A power supply
6ES5 951-7NB21 · 24 V DC input, 3 A power supply
6ES5 951-7LB21 · AC-input 3 A power supply
Browse the S5 range
Siemens SIMATIC S5 PLC › S5 power supplies
External references
Siemens S5-115H manual, 7NB13 power supply table and installation notes (DE)
Siemens S5-115U manual, 7NB13 DSI and module restrictions