6ES5 930-8MD11
Siemens SIMATIC S5 6ES5 930-8MD11 PS 930 Power Supply
The Siemens 6ES5 930-8MD11 is the PS 930 power supply for the S5-100U CPU in the SIMATIC S5 family. A front selector sets the 115/230 V AC input. The output is rated at 24 V DC, 1 A. Siemens specifies an output range of 18–34 V and an open-circuit voltage of up to 39 V.
In an S5-100U installation, the PS 930 feeds the CPU’s 24 V terminals. Trace that feed separately when working on a CPU 100, CPU 102 or CPU 103 cabinet. Siemens assigns the PS 930 to the CPU supply. Check the cabinet’s separate load supply for sensors, valves and other field devices.
Input selection and output readings
The permitted input is 92–132 V AC at the 115 V setting or 187–264 V AC at the 230 V setting. The nominal line frequency is 50/60 Hz. Record the output across L+ and M both open circuit and with the CPU connected. Use Siemens’ PS 930 table when comparing those readings with the ratings of other 24 V power supplies.
Terminals and rail mounting
L1 and N are the AC input terminals. L+ and M are the DC output terminals. A marked protective earth terminal is provided. The module clips onto a 35 mm DIN rail to the left of the CPU. Identify the rail, such as the 6ES5 710-8MA31, before fitting the supply. Bus units such as the 6ES5 700-8MA11 and 6ES5 700-8MA21 belong to the I/O row on the CPU’s right.
Fuse protection and fault checks
Siemens specifies a 3 A fast-acting fuse for short-circuit protection. Confirm both the current rating of the replacement fuse and its operating characteristic. The unit has no fault LED, so use terminal readings to diagnose it. Have qualified maintenance staff check or replace the fuse with the supply isolated.
PS 930, PS 931 and similar part numbers
In the S5 power supply range, the 6ES5 931-8MD11 PS 931 is a 24 V DC, 2 A unit listed for the S5-95U and S5-100U. The 6ES5 950-8MD11 shares the 8MD11 suffix and has its own order number. If the installation also uses a PS 935 or a separate load supply, trace each unit’s role on the S5 system wiring diagram before selecting a replacement.
Editor’s note
Record the 930-8MD11 label, the voltage selector position and the CPU order number together. This helps distinguish it from a 931-8MD11.
After isolating the supply, check the rail latch, terminal cover and PE connection. Photograph the wiring before disconnecting it.
If the CPU stays dark, have qualified staff measure at L+ and M on the supply and then at the CPU input. A difference between the readings points to the wiring and terminals.
If the CPU runs while the field outputs remain inactive, trace the sensor and actuator load supply separately. Use the PS 930 table for the CPU supply readings.
When buying used, ask for the full label, a photo of the voltage selector and an output reading with the CPU connected. To sell a unit, email a label photo, quantity, known condition and asking price to otomasyonavm@gmail.com.
OtomasyonAVM resources and PDFs
+ SIMATIC S5 manuals and PDF archive
Related topics
+ 6ES5 931-8MD11 PS 931 power supply
+ 6ES5 950-8MD11 PS 950 power supply
+ S5-100U CPU 103 · 6ES5 103-8MA01
Browse SIMATIC S5
+ Used Siemens automation equipment
External references
+ Siemens S5-100U system manual · PS 930 specifications, p. 14-4 (EN)