6ES5 373-1AA21

Siemens 6ES5 373-1AA21 SIMATIC S5 373 CMOS EPROM Memory Submodule, 16 KB

The Siemens 6ES5 373-1AA21 is a 16 KB (16,384-byte) 373 CMOS EPROM memory submodule listed under the SIMATIC S5-135U/155U product family. In a compatible memory socket, it retains a programmed application or device configuration when power is removed. This order number uses 27C64 EPROM devices and is listed in BYTE mode in the IBHsoftec programming table.

The 6ES5 373-0AA21 has the same capacity and is easy to confuse with this module. IBHsoftec lists hardware ID 2 for both, but assigns programming number 412 to the 1AA21 and 12 to the 0AA21. Select the programmer profile using the complete order number on the module label.

Which CPU or communications processor can use it?

The Siemens declaration lists the module under the S5-135U/155U product family. To establish socket compatibility, use the memory table for the specific device. For example, when checking a CPU 922, CPU 928, CPU 928A, CPU 928B or CPU 948, confirm the full CPU order number, hardware revision and memory socket together.

For S5 communications processors, use the order data for the specific CP. Siemens catalog ST 50 lists 32, 64 and 128 KB 373 EPROM options for the CP 524-3UA15. A processor such as the CP 525-3UA21 has its own memory requirements. The S5-130W and S5-150A/K entry in the PG 615 manual applies to the 373-0AA21.

How do you read and program the EPROM?

Read and write the module offline using an EPROM programmer that supports the full order number. The MC5 module library gives the 1AA21 a 2 × 8 KB organization and specifies 13 V VPP. VPP is the programming voltage. Select the 1AA21 profile on your programmer, then read the module back and compare it with the source file. To reuse a programmed EPROM, save its contents first, then erase it with UV light and run a blank check.

Uploading the program currently running in the PLC is a separate operation. S5 PG connection cables include the 6ES5 734-2BD20 and 6ES5 734-2BF00. With a matching PG and CPU interface, use the connection to upload the live program. Read the EPROM separately on the programmer. Changes made on the machine may have left the two copies at different revisions.

How do the related memory modules differ?

Within the 373 CMOS EPROM family, the 373-1AA41 provides 32 KB, the 373-1AA61 provides 64 KB, and the 373-1AA81 provides 128 KB. The earlier 373-0AA41 and 373-0AA61 have separate entries in the programmer table.

The 375-0LA21 also holds 16 KB and belongs to the 375 series. The 374-1KH21 is a Flash EPROM in a different card format. When choosing a spare, match the series, socket and programmer profile as well as the capacity.

Editor’s note

Photograph the label before removing the module. Record 373-1AA21 alongside the device it came from.

When ordering a spare, record the CPU or CP’s complete order number and hardware revision. Confirm the memory socket in the manual for that device.

If the old EPROM is readable, save its contents before erasing it. Keep the live PLC upload and the EPROM copy under separate filenames.

If the programmer reports a read error, start with the 412 profile, adapter seating and contacts. If the processor has been replaced, check the memory socket again.

After programming the spare, read it back and compare the contents. Check the opaque label over the UV window and record the revision of the verified file.

OtomasyonAVM resources and PDFs

See the Siemens SIMATIC S5 PLC overview for the system family and the S5 memory module catalog for order numbers.

For documentation on other systems in the S5 family, see the OtomasyonAVM S5-115 PDF archive.

Related topics

Compare the 373-0AA21 EPROM of the same capacity with the 373-1AA41, 373-1AA61 and 373-1AA81 from the same CMOS family.

Browse the S5 range

Siemens SIMATIC S5 › S5 memory modules

To sell a Siemens S5 module, email the full order number, quantity, working condition, label photo and asking price to otomasyonavm@gmail.com.

Siemens and other external references

+ Siemens S5-135U/155U declaration of conformity, Appendix 1 and 373-1AA21 entry

+ IBHsoftec S5 EPROMMER module and programming table

+ MC5 development system manual, Section 20 and EPROM programming table

+ Siemens SIMATIC S5-135U/155U system manual and CPU memory sections

+ Siemens ST 50 catalog, CP 524 memory options

+ Siemens PG 615 manual, Table 2.9 and the 373-0AA21 comparison