6ES5 373-0AA41
Siemens 6ES5 373-0AA41 SIMATIC S5 373 EPROM Memory Submodule, 32 KB
The Siemens 6ES5 373-0AA41 is a 373-series NMOS EPROM memory submodule for storing user programs in SIMATIC S5 systems. Four 2764 EPROMs provide 32 KB (32,768 bytes) of storage. Siemens rates this capacity at 16,384 STEP 5 instructions for the S5-130W. This order number serves as CPU program memory in the S5-130W Version B and S5-150A/K.
The EPROM retains its programmed contents when power is removed. Before replacing it, compare the blocks read from the EPROM with the current program in the S5 CPU. Changes made on the machine may postdate the EPROM copy.
Where does it fit in the S5-130W and S5-150A/K?
In the S5-130W Version B, the submodule fits an EPROM socket on the 6ES5 921-3WB11 central processor board. With two EPROMs installed, the CPU maps the lower submodule immediately after the upper submodule’s address range.
In the S5-150A/K, the submodule fits the 350 memory board in the S5 rack using the 6ES5 983-0BA11 mounting spacer. Jumpers select the start address in 4 KB increments. When two EPROMs are fitted, their address ranges must be contiguous.
Reading and reprogramming the EPROM
The module selection example in the PG 615 manual shows the 373-0AA41 as entry 3. Programming on a PG 670 requires the 6ES5 984-0UA11 programming adapter. The PG 615 manual at the foot of this page covers reading and programming.
Reusing a programmed module requires a UV eraser. Save the existing contents before erasing. Run a blank check before programming, then read the EPROM back and compare it with the source file.
What does it store on the CP 524, CP 525-2 and WF 470?
Siemens’ S5R01E driver documentation for S5 communications processors lists this EPROM for the CP 524 6ES5 524-3UA13 and CP 525-2 6ES5 525-3UA21. In this application the EPROM stores the communications driver. The documented CP 524 configuration uses the 6ES5 752-0AAx2 serial interface module. Siemens lists this driver configuration for the S5-115U, S5-135U, S5-150U and S5-155U. See the S5-115U PDF archive for manuals on that system.
On the WF 470 graphics module, the EPROM fits memory socket X10, X20 or X30 and stores screen images and text. Siemens specifies PNUMMER 0014 for this NMOS module in the WF 470 screen generation software.
How to identify similar EPROM order numbers
The 373-1AA41 is the CMOS EPROM version with the same capacity. The 373-0AA21 and 373-1AA21 hold 16 KB. The 373-0AA61 and 373-1AA61 hold 64 KB, and the 373-1AA81 holds 128 KB. Use the full label code to select the module on the programmer.
The 372-0AA51 and 372-0AA61 belong to a separate EPROM family. The PG 615 table lists the 32 KB 372-0AA61 under S5-150S. The same table puts 375 modules such as the 375-0LA15 and 375-0LA41 under other S5 families. When choosing a spare, check both its capacity and the host device’s memory socket table.
Editor’s note
Look for 0AA41 on the label. The 1AA41 also holds 32 KB. Match the full order number to identify the NMOS module and select the correct programming option.
Keep two separate backups. Retrieve the live CPU blocks using the appropriate S5 programming cable. Save the EPROM readback separately with the machine and socket details.
Photograph the installation before removal. Record the upper and lower EPROM positions on the 130W or the spacer and address jumpers on the 150A/K’s 350 board. Switch off the system before removing the submodule.
Keep a copy of the communications driver. Save the CP order number, interface module and driver version with the EPROM backup.
Check the contents and installation separately after replacement. First confirm that the new EPROM reads correctly on the programmer and contains the intended file. Then check the socket order or the address jumpers on the 350 board.
OtomasyonAVM resources and PDFs
SIMATIC S5 memory submodules · Siemens SIMATIC S5 PLC systems
OtomasyonAVM SIMATIC S5-115U PDF manual archive
Related topics
S5-130W Version B central processor board · 373-0AA21 16 KB EPROM · 373-1AA41 32 KB CMOS EPROM
Browse SIMATIC S5
Siemens SIMATIC S5 · S5 memory cards · SIMATIC S5 CPUs
Siemens and other external references
Siemens S5-130W Version B system manual (German PDF)
Siemens installation instructions for the 350 board and 370/372/373 submodules (German)
Siemens PG 615 manual and programmable module table (German PDF)
Siemens S5R01E driver manual for the CP 524 and CP 525-2 (German PDF)
Siemens WF 470 technical manual, memory sockets and PNUMMER table (English PDF)