6ES5 475-3AA11

Siemens 6ES5 475-3AA11 SIMATIC S5-150K/150S Four-Channel ±10 V Analog Output Module

The Siemens 6ES5 475-3AA11 is a compact K-format 475 analog output module for S5-150K and S5-150S controllers in the SIMATIC S5 range. It has four non-isolated, short-circuit-proof ±10 V voltage outputs. A digital-to-analog converter turns the STEP 5 command, written as an 8-bit magnitude and a separate sign bit, into a bipolar voltage reference.

In service, the analog voltage signal provides a command reference for a compatible drive, servo amplifier or proportional valve controller. The receiving device determines what positive and negative voltages command. Verify its ±10 V input and signal reference before connecting the cable.

K-format module and related order numbers

The 476-3AA11 provides 0–20 mA current outputs in the same compact family. The 475-5AA11 is the A-format version with four ±10 V outputs. The 470-4UB12 is an isolated U-format module with eight ±10 V outputs. Use the 3AA11 suffix, the output type and the installed rack when selecting a spare.

STEP 5 base address and output encoding

The module’s base address is independent of the rack slot. Its coding plug sets the address to 128, 136, 144 … 248. Each channel uses two bytes. With a base address of 160, outputs 0–3 use byte pairs 160/161, 162/163, 164/165 and 166/167 respectively.

Byte 0 carries the magnitude and bit 0 of Byte 1 carries the sign. A magnitude of 128 gives +5 V with a sign bit of 0 and −5 V with a sign bit of 1. Each step is approximately 39.06 mV, and a magnitude of 255 gives a nominal +9.961 V at the positive end. For STEP 5 documentation, see the Siemens S5 manual index.

Supply, front connector and output load

The rack supply is +5 V DC ±5% and the external supply at the front connector is 24 V DC nominal (20–30 V DC). The Siemens drawing identifies L+ as 1–1 and L− as 4–1. The signal and 0 V pairs for outputs 0–3 are 1–3 / 1–5, 2–1 / 2–3, 2–5 / 2–7 and 3–3 / 3–5 respectively.

Each output requires a resistive load of at least 3.3 kΩ and a capacitive load of no more than 100 nF. Siemens specifies a short-circuit current of 25 mA and a tolerance of ±4‰ (±0.4%) of the rated output range.

Use a shielded signal cable and terminate the shield according to the cabinet’s grounding arrangement. If the receiving device requires a different signal type or reference arrangement, select analog signal conversion to suit its input and the output module’s load limits.

Commissioning checks

If the S5 central processor or rack layout has changed, record the labels of modules such as the 925-3KA12, 926-3KA12 and 927-3KA13 listed in the S5-150K documentation. Verify the peripheral slot assigned to the 475 and check that the coding plug matches the STEP 5 address.

If the program is issuing no output command, trace the measured value and the permissives. The cabinet may use a 465-3AA13 analog input module for feedback and a 420-3BA11 or 430-3BA11 digital input module for permissives. If the command is present, check the 475 supply and measure the channel voltage against its 0 V terminal.

Editor’s note

Record the module and rack labels together. Include the 475-3AA11 order number and the S5-150K or S5-150S rack designation when ordering.

Photograph the coding plug. Record the base address and jumper positions before removing the module.

Isolate power before replacement. Switch off the central unit, expansion units and connected field devices.

Test both polarities. With the machine in a safe state, check the 0 V and ±5 V commands. Verify the magnitude and sign bytes separately.

Ask for test results from all four channels. When buying a used Siemens part, check the connector and coding plug as well. To sell a module, email its code, quantity, working condition, label photo and price to otomasyonavm@gmail.com.

OtomasyonAVM resources and PDFs

SIMATIC S5 analog input and output modules · SIMATIC S5 central processors

Siemens S5 system manuals and STEP 5 programming documentation

Related topics

476-3AA11, four-channel 0–20 mA K-format output · 475-5AA11, four-channel ±10 V A-format output

Browse the S5 range

Siemens SIMATIC S5 › S5 analog modules

External references

Siemens 475-3AA11 operating instructions, specifications and front connector (DE) · Siemens compact analog module manual, base address and output bytes (DE)

Siemens S5 compact systems, cabinet installation and wiring guide (DE)