Delta Motion Control Cards

Delta Motion Control Cards use an industrial PC to handle positioning and synchronized motion across servo axes. Match the full card model, the PC’s PCI or PCIe slot, and the drive’s DMCNET, EtherCAT or pulse-command interface.

DMCNET cards · EtherCAT cards · Editor’s Note · Technical documents

DMCNET · PCI-DMC series

PCI-DMC-A02 supports up to 12 motion axes and PCI-DMC-F02 up to 6. Both cards have 32 local digital inputs and 24 local digital outputs. Check the drive’s exact DMCNET model, such as ASDA-B2-F.

PCI-DMC-B01 provides two groups of pulse capture and compare. PCI-DMC-B02 adds two-dimensional comparison for triggers based on X and Y positions. PCI-DMC-B03 serves applications that need multiple compare outputs. For an older PCI-DMC-A01, use the A01/B01 manual.

EtherCAT · PCI-L221 and PCIE-L221

PCI, P/F type · PCI-L221-P1D0 (32 axes), PCI-L221-F1D0 (16 axes), PCI-L221-F0D0 (8 axes).

PCI, B type · PCI-L221-B1D0 (32 axes), PCI-L221-BF1D0 (16 axes), PCI-L221-BF0D0 (8 axes). These models provide two groups of pulse comparison.

PCI, C type with handwheel · PCI-L221-CF1D0 (16 axes) and PCI-L221-CF0D0 (8 axes) support an MPG handwheel. The 2024 PCI-L221 manual also lists PCI-L221-AF0D0 as an 8-axis I/O model.

PCIe, B type · PCIE-L221-B1D0 (32 axes), PCIE-L221-BF1D0 (16 axes), PCIE-L221-BF0D0 (8 axes). These models provide two groups of pulse comparison. Match the EtherCAT drive variant, such as ASDA-A2-E.

PCI-L221-XXD0 denotes the family. For a spare or a replacement, read the full label, including the variant code such as P1, F1, BF1 or CF1.

Legacy pulse-command card · PCI-M324-F1D0 is a four-axis PCI card documented in the 2020 catalogue. Use the wiring drawing in the pulse-output section for this card.

Editor’s Note

Before buying a spare, photograph both sides of the card and the drive label. RJ45 ports with the same shape can carry different networks.

When replacing the PC, record the motherboard slot, operating system, card driver and the API/DLL version used by the machine application.

On a working machine, back up the card ID, axis order, scaling, homing settings and I/O mapping. After power-up, check that the axes appear in the expected order.

EzDMC for DMCNET and EcNavi for EtherCAT help check the network and its functions. Match the software to the full card model and the existing project.

If the axes appear but the camera fails to trigger, trace the compare output and encoder input against the wiring drawing for that card. Check the I/O connections, encoder signal type and servo communication units together.

Technical documents

DMCNET cards · PCIe and PCI EtherCAT cards · PCI-M324 pulse output · ordering codes. Delta’s 2020 English catalogue, 64 pages.

Delta PCIe product page · EN · PCI-L221 operation manual · Delta download · Chinese · Legacy PCI-DMC-A01/B01 manual · EN.

Related topics

Networks and axes · what is EtherCAT? · network topology · communication troubleshooting · Delta EtherCAT cables · AS500 motion controllers · AH motion controllers.

Drives and connections · Delta servo drives · servo motors · servo power and encoder cables · encoder connectors · encoder signal converters · absolute encoder accessories · operator panel cables.

Panel components · DC bus units · servo braking resistors · servo power connectors · STO connections.

Delta Servo Modules and Accessories · Delta Servo Manuals · Used Delta equipment