Delta ASDA-A

Delta ASDA-A Servo Drives

Delta ASDA-A is an AC servo drive series for ASMT rotary servo motors, with drive models from 100 W to 3 kW. It accepts external pulse commands, stored position commands, and analog speed or torque commands. When servicing an existing feed table, winder or positioning axis, start with the full servo motor code and identify the command the machine uses for axis control.

ASDA-A and ASMT motor matching

Delta’s matching table lists ASD-A0121L□ / ASMT01L250□□ at 100 W, ASD-A0421L□ / ASMT04L250□□ at 400 W and ASD-A0721L□ / ASMT07L250□□ at 750 W. In the 1 kW class, the ASD-A1021L□ is listed with the low-inertia ASMT10L250□□, and the ASD-A1021M□ with the medium-inertia ASMT10M250□□. When comparing units with the same power rating, check the motor and drive combination, load and transmission, input phase and complete nameplate codes. The squares indicate order-code options.

Command modes and connections

In Pt mode, position control uses an external pulse command. P1-00 selects the pulse input format, P1-01 selects the control mode, and P1-44/P1-45 set the electronic gearing ratio. If the PLC supplies pulse and direction signals, check both the command format and the physical output type against the CN1 diagram. In Pr mode, digital inputs can select from eight position commands stored in the drive.

S and T modes can accept an external −10 to +10 V DC command. P1-40 sets the analog command scale for speed control and P1-41 for torque control. CN1 carries commands and I/O, CN2 connects the motor encoder, and CN3 provides serial communication. The manual documents RS-232, RS-485 and RS-422 for CN3. Verify the feedback cable against both full model codes.

Installation sheet and user manual

ASDA-A installation and wiring sheet (EN) · 2006, 2 pages. ASDA-A and ASMT matching, panel layout and wiring references.

ASDA-A/A+ user manual (EN) · April 2009, 383 pages. See section 1.3 for ASDA-A motor matching, section 1.5 for control modes, and chapter 10 for alarm diagnostics.

Existing OtomasyonAVM copy of the manual · Delta servo PDF archive

Editor’s Note

Check the nameplates and ask to see a running axis when buying used. Compare the full drive and motor codes, the condition of the CN2 connector, the motor brake option and the cables. If the drive is still in the machine, save the parameters and the P4-00–P4-04 alarm history before removal. A bench test with a compatible ASMT motor should let you see command response, feedback and the alarm record.

AL008 and AL011 point to different parts of the axis. AL008 concerns the external pulse command. Check the PLC command frequency, P1-00 and the CN1 connection. AL011 indicates a position detector fault. Follow the manufacturer’s safe service procedure when checking the CN2 cable, connector and motor encoder. If the alarm appears at a particular cable-carrier position, inspect the bend there and consider signal noise.

If a replacement drive moves the axis the wrong distance, check scaling first. Compare P1-44/P1-45 with the old backup. Check the P2-10–P2-17 digital input assignments and verify home return for the machine. If AL009 occurs under load, compare commanded and actual movement. Check for mechanical problems such as a binding slide or coupling play before changing the deviation limit.

Relate a stopping alarm to the moment it occurred. AL002 indicates main-circuit overvoltage, and AL005 indicates a regeneration fault. If the alarm appears during rapid deceleration, review stopping time, load and the regenerative braking arrangement together. Compare the braking resistor with the resistance and power ratings for the exact drive model.

Record zero and scaling on analog-command axes. If the axis creeps at a stop command, check the controller’s zero command and analog input scaling first. Once commanded and actual speeds agree and the mechanism moves freely, assess servo gain and auto-tuning. Record the values before and after any change so you can compare them if the fault returns.

Related topics and Delta series

Servo control loops · Supervisory control in servo systems

Delta ASDA-A+ · Delta ASDA-AB · Delta ASDA-B · Delta ASDA-A2 · Delta ASDA-B2 · Delta ASDA-A2R

Delta servo drive series · Used Delta automation equipment

External reference · Delta ASDA-A installation sheet