Delta HMI Starter Kits

Delta HMI Starter Kits explains component compatibility in starter kits that combine PLC, HMI and training connections. Technical tables dated 2017-09-13 define the product-generation boundary.

Delta HMI Starter Kits: The part does not replace the panel; it completes mounting, power, signal expansion, communication or programming. Check both connector ends and the supported HMI generation as well as the ordering code.

Delta HMI Starter Kits: Delta technical tables are the basis for the model distinctions on this page.

Delta HMI Starter Kits: Connection selection is based on combined PLC and HMI package. A cable or module is not interchangeable until the port standard on both the panel and the connected device has been verified.

When selecting Delta HMI Starter Kits, consider Delta HMI Mounting and Power Connections, Delta HMI Digital I/O Expansion Modules and Delta HMI Ethernet Expansion Modules together for display, software and communication duties.

When commissioning Delta HMI Starter Kits, Delta HMI Printer Expansion Modules, programming and HMC cables and shared HMI power supplies complete power, programming-cable and field connections within the same hardware generation.

Model distinctions for Delta HMI Starter Kits

UT-14SS2-A: HMI accessory or module in the starter kit. Selection is distinguished by combined PLC and HMI starter package. Delta documentation at PDF pp.32–34,45–48 contains the comparison table for these codes.

UT-12SE-A1: HMI accessory or module in the starter kit. Selection is distinguished by combined PLC and HMI starter package. Delta documentation at PDF pp.32–34,45–48 contains the comparison table for these codes.

A function name alone is insufficient for Delta HMI Starter Kits. Match supply rating, signal direction, connector type, cable length and supported panel generation to the applicable product row.