Delta AS04PU-A

Delta AS04PU-A 4-axis positioning module

The Delta AS04PU-A adds four pulse-controlled axes to a Delta AS PLC system. It provides eight NPN open-collector outputs, two per axis, with a maximum pulse frequency of 100 kHz per axis. This Delta AS specialty module is used with pulse-input servo and stepper drives.

Inputs, outputs and drive interface

The six inputs X0.0–X0.5 are rated 24 V DC, 5 mA with a maximum hardware bandwidth of 1 kHz. Assign home and limit sensors to the relevant axis in the project. Check the sink/source arrangement and the digital signal type when choosing sensors. See AS digital modules for additional field I/O.

The Y0.0–Y0.7 outputs operate in the 5–30 V DC range. The maximum resistive load is 0.1 A per output. Check whether the drive’s pulse input accepts an NPN open-collector output. Match the module and drive settings for pulse and direction or CW/CCW operation.

ISPSoft, HWCONFIG and programming cable

Open HWCONFIG in ISPSoft and place the AS04PU-A in the position it occupies in the actual module layout. In Device Setting, check the output mode, home and limit assignments, input filter and axis parameters. Delta documents API 1402 for axis setup and API 1407 for homing.

The PC connects through the AS CPU. Choose the COMMGR channel for the CPU model. Use a Mini USB data cable on CPUs that support Mini USB or an RJ45 network cable on CPUs that support Ethernet. Confirm the connection against the AS200 or AS300 CPU code. See Delta PLC cables and PLC programming for more detail.

Editor’s Note

When buying used, ask for photos of the AS04PU-A label and removable terminal blocks.

Check the pulse input type of the exact drive model, even when the drive brand stays the same.

Back up the HWCONFIG parameter file before replacing the module.

Monitor the limit inputs online before commanding movement.

For the first test, jog one axis at low speed and check direction and the home sensor.

Related topics

The AS02PU-A provides two differential-output axes at up to 200 kHz. See AS324MT-A for built-in CPU pulse outputs and AS500 motion controllers for network-based motion.

Delta PLC and HMI manuals · AS expansion modules · Delta PLC · Used Delta equipment

External references · AS Module Manual, Chapter 12 (EN) · AS Hardware and Operation Manual (EN)