Delta AS16AP11R-A

Delta AS16AP11R-A Digital I/O Module

Delta AS16AP11R-A is a mixed digital I/O module for Delta AS PLCs with 8 digital 24 V DC inputs and 8 relay outputs. This AS expansion module uses spring-clamp terminals and can read sensor and limit-switch signals and switch suitable control loads.

Inputs, S/S and Relay Outputs

The inputs support 24 V DC sink/source wiring. Match the S/S input common to the PNP or NPN sensor using the Delta wiring diagram. C0 is the common for the switched load circuit. An external circuit supplies the load voltage. Select a suitable 24 V power supply and protection for the DC load circuit.

The Delta AS Module Manual, section 2.4.9, specifies 10–240 V AC or 5–24 V DC. For resistive loads, the limits are 2 A per output and 8 A total per common. For inductive loads such as coils and solenoids, account for inrush current and contact protection. Use a suitable interposing relay or contactor where the load requires it.

Document note. The 2022 instruction sheet also lists 250 V AC / 30 V DC. Use the narrower range in the module manual and check the ratings that apply to the hardware revision.

Adding the Module to the PLC Project

For AS200 or AS300 CPUs in the Delta AS PLC range, add the module to the project in its physical installation order. In HWCONFIG in ISPSoft, check the AS16AP11R-A model and assigned input and output addresses. Verify the COMMGR settings for the PC-to-PLC connection. See the Delta PLC and HMI manuals for wiring and configuration.

Editor’s Note

Read the complete AS16AP11R-A code on the label. The similar T and P variants use transistor outputs.
Before buying a used module, check the spring clamps, side connector and signs of overheating.
During an input test, operate the sensor and check the input LED alongside the PLC X bit.
When the output LED is on, verify each contact separately with a suitable 24 V DC test load.
Isolate power before inspecting field terminals. Calculate the C0 common current before connecting the loads.

Related Topics

For 8 inputs and 8 transistor outputs, see AS16AP11T-A (NPN) and AS16AP11P-A (PNP). For relay output expansion, see AS08AN01R-A (8 outputs) and AS16AN01R-A (16 outputs). For additional inputs, see AS08AM10N-A and AS16AM10N-A.

Delta PLC accessories · Delta PLC models · Second-hand Delta automation

External references · Delta AS Module Manual, section 2.4.9 (English) · AS16AP11R-A instruction sheet (includes English and Turkish).