Delta AS08AN01P-A

Delta AS08AN01P-A 8-channel PNP output module

The Delta AS08AN01P-A is an AS digital expansion module that adds 8 PNP transistor outputs to compatible AS200 and AS300 systems. It switches the positive supply to suitable DC loads such as indicators, interface relays and valve controls.

Terminals and output wiring

The removable spring-clamp terminal block has C0 common terminals and output channels 0–7. In a PNP sourcing circuit, C0 connects to the positive terminal of the external load supply. Each load connects between its output terminal and the supply’s 0 V return.

The output circuit rating is 5–30 V DC. For resistive loads, the limits are 0.5 A per output and 4 A total for the C0 common. Delta lists 100 Hz for resistive loads and a limit of 12 W at 24 V DC and 0.5 Hz for inductive loads. Select suppression and switching frequency to suit the coil load.

ISPSoft and output addresses

Install the module in the expansion chain on the right side of a compatible CPU. In ISPSoft HWCONFIG, verify the module code, its physical position and the Y output addresses. The 0–7 markings identify the physical channels. Use the project’s I/O mapping for the program addresses. Connect to the CPU through COMMGR for online checks.

Related modules

The AS08AN01T-A provides 8 NPN outputs, the AS08AN01R-A provides 8 relay outputs, and the AS16AN01P-A provides 16 PNP outputs. The AS16AP11P-A combines 8 digital inputs and 8 PNP outputs. For separate inputs, see the AS08AM10N-A and AS16AM10N-A.

Editor’s Note

When buying a used module, check that the label clearly reads AS08AN01P-A. The P identifies the output type.

Check photos of the spring-clamp terminal block, DIN rail latch and side expansion connector.

Record the module order and Y addresses before removal. Disconnect power before removing the terminal block.

On the bench, verify the C0 supply and test each output with a suitable load.

If an output LED is on and the load does not operate, check the C0 supply, the 0 V return and the voltage across the load.

Related topics

Delta AS PLC series · AS expansion modules · AS analog modules · AS power supplies · Delta PLC software · Delta PLC cables

Delta PLC home · Used Delta products · Delta PLC and HMI manuals

Manufacturer references

AS08AN01P-A installation sheet (includes EN) · AS module manual (EN) · AS hardware manual (EN) · AS series catalog (EN)