Yaskawa Sigma II Small Motors
SGMAH and related compact Sigma II motors vary in torque and feedback despite their small frames. Compare rated and peak torque, supply class and encoder option against the same complete motor designation.
What matters in selection
A compact motor can meet acceleration torque yet fail the continuous-duty requirement. For SGMAH, complete the brake, shaft and encoder selection from the physical nameplate.
When applying an SGMAH motor, confirm the supply and command variant of Yaskawa Sigma II Standard separately.
Technical references: Sigma FSP Servo System Catalog; Sigma II Omron-Yaskawa data sheet. For this family, use servomotor manuals to identify the relevant document.
Models and technical distinctions
| Model / frame | Documented distinction |
|---|---|
| SGMAH-A3AAF21 | rated torque 0.095 Nm; peak torque 0.286 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: straight without keyway. |
| SGMAH-A3AAF2C | rated torque 0.095 Nm; peak torque 0.286 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; holding brake; shaft: straight without keyway. |
| SGMAH-A5AAF21 | rated torque 0.16 Nm; peak torque 0.478 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: straight without keyway. |
| SGMAH-A5AAF2C | rated torque 0.16 Nm; peak torque 0.478 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; holding brake; shaft: straight without keyway. |
| SGMAH-01AAF21 | rated torque 0.318 Nm; peak torque 0.953 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: straight without keyway. |
| SGMAH-01AAF2C | rated torque 0.318 Nm; peak torque 0.953 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; holding brake; shaft: straight without keyway. |
| SGMAH-01AAF41 | rated torque 0.318 Nm; peak torque 0.953 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: keyed. |
| SGMAH-01AAF4C | rated torque 0.318 Nm; peak torque 0.953 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; holding brake; shaft: keyed. |
| SGMAH-02AAF41 | rated torque 0.636 Nm; peak torque 1.907 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: keyed. |
| SGMAH-02AAF4C | rated torque 0.636 Nm; peak torque 1.907 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; holding brake; shaft: keyed. |
| SGMAH-04AAF41 | rated torque 1.278 Nm; peak torque 3.827 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: keyed. |
| SGMAH-04AAF4C | rated torque 1.278 Nm; peak torque 3.827 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; holding brake; shaft: keyed. |
| SGMAH-08AAF41 | rated torque 2.387 Nm; peak torque 7.132 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: keyed. |
| SGMAH-08AAF4C | rated torque 2.387 Nm; peak torque 7.132 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; holding brake; shaft: keyed. |
| SGMAH-02AAN21 | rated torque 0.636 Nm; peak torque 1.907 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: NEMA flange. |
| SGMAH-04AAN21 | rated torque 1.278 Nm; peak torque 3.827 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: NEMA flange. |
| SGMAH-08AAN21 | rated torque 2.387 Nm; peak torque 7.132 Nm; maximum speed 5000 rpm; voltage class 200 V single-phase; 13-bit encoder; shaft: NEMA flange. |
| SGMAH-A3BAF21 | rated torque 0.095 Nm; peak torque 0.286 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; shaft: straight without keyway. |
| SGMAH-A3BAF2C | rated torque 0.095 Nm; peak torque 0.286 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; holding brake; shaft: straight without keyway. |
| SGMAH-A5BAF21 | rated torque 0.16 Nm; peak torque 0.478 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; shaft: straight without keyway. |
| SGMAH-A5BAF2C | rated torque 0.16 Nm; peak torque 0.478 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; holding brake; shaft: straight without keyway. |
| SGMAH-01BAF21 | rated torque 0.318 Nm; peak torque 0.953 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; shaft: straight without keyway. |
| SGMAH-01BAF2C | rated torque 0.318 Nm; peak torque 0.953 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; holding brake; shaft: straight without keyway. |
| SGMAH-01BAF41 | rated torque 0.318 Nm; peak torque 0.953 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; shaft: keyed. |
| SGMAH-01BAF4C | rated torque 0.318 Nm; peak torque 0.953 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; holding brake; shaft: keyed. |
| SGMAH-02BAF41 | rated torque 0.636 Nm; peak torque 1.907 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; shaft: keyed. |
| SGMAH-02BAF4C | rated torque 0.636 Nm; peak torque 1.907 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; holding brake; shaft: keyed. |
| SGMAH-02BAN21 | rated torque 0.636 Nm; peak torque 1.907 Nm; maximum speed 5000 rpm; voltage class 100 V single-phase; 13-bit encoder; shaft: NEMA flange. |
| SGMPH-01AAE41D | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-01AAE4CD | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-02AAE41D | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-02AAE4CD | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-04AAE41D | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-04AAE4CD | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-08AAE41D | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-08AAE4CD | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-15AAE41D | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-15AAE4CD | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-01BAE41D | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-01BAE4CD | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-02BAE41D | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMPH-02BAE4CD | The source identifies an incremental encoder; full motor options remain code-specific. |
| SGMAH-08AAA61D-OY | Documented rotary servomotor designation; verify the exact option suffix and supported system before replacement. |