6ES5 374-2FH21

Siemens 6ES5 374-2FH21 SIMATIC S5 374 Long-Type 256 KB Flash EPROM Memory Card

The Siemens 6ES5 374-2FH21 is a 256 KB, 16-bit, long-type Flash EPROM 374 memory card for SIMATIC S5. It belongs to the generation that reads at 5 V and writes at 12 V. Siemens documents 374 Flash EPROM cards for selected S5-135U and S5-155U CPUs and lists this part number for the CP 1430 TF and CP 516.

In compatible S5 CPUs on the S5-135U and S5-155U, the card holds a nonvolatile copy of the STEP 5 user program and data. In the CP 1430 TF, it stores the communications database created with NCM COM 1430 TF. The 6ES5 516-3UA11 CP 516 manual also lists the 2FH21 for its two memory card slots.

CPU slots and hardware versions

Siemens lists the CPU 928B-3UB21, CPU 928-3UA21 and CPU 948 in its section on 374 Flash EPROM cards. The S5-155U ordering table includes the 6ES5 948-3UA13 and 6ES5 948-3UA23 as CPU 948 variants. The S5-135U/155U manual lists separate 376 memory submodules for the CPU 928B-3UB12 and CPU 928-3UA12.

Assess the 256 KB of external card storage separately from the CPU’s internal RAM. In this CPU application, the S5-135U/155U manual says that an overall reset automatically copies the card contents into internal RAM. Back up the running program and any required data blocks before that operation.

2FH21, 2KH21 and 2AH21 differences

The 6ES5 374-2KH21 is a 256 KB long-type Flash EPROM from the generation that reads and writes at 5 V. Siemens lists it as the successor to the 2FH21. On the read/write CP 516, support for the newer cards starts at hardware revision 2. The 6ES5 374-2AH21 is a long-type RAM card of the same capacity.

The 374-2KG21 at 128 KB, 374-2KK21 at 1 MB and 374-2KL21 at 2 MB are separate 5 V Flash card options. Check both the target slot and the software’s card list before selecting a capacity.

Programming with a PG and storing the CP 1430 TF database

For a CPU program, erase and write the 374 Flash card offline using a compatible PG card slot or programming adapter. S5 programming cables such as the 6ES5 734-2BD20 and 6ES5 734-2BF00 provide the online link between a compatible PG and the CPU.

For the CP 1430 TF S5 communications processor, Siemens specifies a 256 KB limit for configuration data and programming number 500 for NCM COM 1430 TF transfers. Save the CPU’s STEP 5 backup and the CP’s NCM database as separate files.

Editor’s note

Read the 2FH21 suffix on the label. For a long-type card, record the full part number and Flash or RAM type along with the capacity.

Read the card before erasing it. Label the backup with the machine, the card part number and the CPU or CP slot it came from.

Check the programming hardware. Confirm in the equipment manual that the PG or adapter supports the 2FH21’s 12 V write requirement. Read back the result after writing and compare it with the source file.

Follow the commissioning procedure for the target slot. Loading a CPU program and transferring a CP network database are separate operations. The Siemens S5 system and manuals page points to the relevant documentation.

Ask for a write and read-back test on a used card. When buying used Siemens parts, check the label and test result together. To offer a card for sale, send the full part number, quantity, condition, label photo and asking price to otomasyonavm@gmail.com.

OtomasyonAVM resources and PDFs

SIMATIC S5 memory cards · OtomasyonAVM Siemens S5 manual index, S5-135U/155U and STEP 5

OtomasyonAVM S5-115 PDF archive · CP 516 memory module page

Related topics

6ES5 374-2KH21, 256 KB 5 V Flash EPROM · 6ES5 374-2AH21, 256 KB RAM card

6ES5 928-3UB21 CPU 928B · 6ES5 948-3UA23 CPU 948

Browse the S5 range

Siemens SIMATIC S5 PLCs › S5 memory cards

External references

Siemens S5-135U/155U system manual, 374 Flash EPROM cards · 6ES5 374-2FH21 ordering table

Siemens CP 1430 TF manual, memory card list · Writing an NCM database to a card

Siemens CP 516 manual and notice on the transition to 5 V Flash memory cards (EN/DE)