6ES5 374-2AH21

6ES5 374-2AH21 Siemens SIMATIC S5 256 KB Long-Type RAM Memory Card

The Siemens 6ES5 374-2AH21 is a 256 KB (262,144-byte), 16-bit, long-format CMOS RAM memory card for SIMATIC S5 equipment. Siemens lists this order number for storing the configuration database in the CP 1430 TF communications processor and application blocks in the CP 516 memory module.

The contents depend on the host module. In a CP 1430 TF, the card can hold network and connection settings. In a CP 516, it can hold application blocks such as recipe data. The 2AH21 uses volatile RAM. Before removing it, record the card and host order numbers and locate the backup for that application.

What does the card store in a CP 1430 TF?

Siemens lists the 2AH21 for the memory card slot in the CP 1430 TF communications processor. The card holds the configuration database prepared in NCM COM 1430 TF. When making a backup, record the CP’s Ethernet address and configured connections. On an AUI installation, also record the SINEC H1 transceiver connection.

Use CP → FD in NCM to back up the configuration from the installed CP. For a direct PG connection, Siemens specifies AS511 and the 734-2 cable family. Verify the full order number of the S5 service cable against the wiring diagram for the PG and CP.

The CP 1430 TF manual describes battery backup from the PLC rack for the CP’s internal configuration memory. Siemens requires CP power to be off when inserting or removing a memory card. Have a restorable project file ready before switching off the CP.

How does the CP 516 retain RAM data?

The CP 516, 6ES5 516-3UA11, stores application blocks in named sectors on the memory card. The Siemens ST 50 catalogue lists the 2AH21 as a 256 KB RAM option for this module. It also lists the 6ES5 980-0AE11 lithium backup battery for the CP 516.

According to the CP 516 manual, the fitted RAM card receives power from the system’s 5 V rail when the PLC is on and from the PLC and CP backup arrangement when power is off. On a rack fitted with a 955-3LF12 power supply, for example, record the rack supply and the CP 516 battery status separately. Removing the RAM card from the CP 516 clears its contents. Back up the required sectors and blocks with the card installed.

How do the Flash EPROM cards differ?

The 6ES5 374-2FH21 is a 256 KB long-format Flash EPROM card listed for the CP 1430 TF and CP 516. The 6ES5 374-2KH21 is the 256 KB long-format 5 V Flash EPROM version. Flash memory retains data without power. When selecting a spare, check the memory technology, capacity and exact order number supported by the host.

The Siemens S5-155U CPU 948 table lists Flash EPROM options for the 6ES5 948-3UA11 and 6ES5 948-3UA21. These include the 256 KB 2KH21, the 1 MB 2KK21 and the 2 MB 2KL21.

Siemens lists the 374-2KG21 Flash EPROM separately for the CPU 928-3UA21 and CPU 928B-3UB21. The S5-115U CPU 945 family uses documented short-format Flash EPROM options such as the 374-1KG11 and 374-1KH21. Match the card format and memory type to the installed CPU or CP order number.

Editor’s note

Before removal, record the 6ES5 374-2AH21 label, the host CP order number and the slot position. On a CP 516, distinguish slot A from slot B in the service record.

On a CP 1430 TF, save the NCM configuration file first. Check the Ethernet address and connection names to confirm the backup belongs to the correct station.

On a CP 516, back up the card’s sectors and blocks while the card is installed. Check separately that the backup covers any recipes or application data stored on the CP 516.

If contents disappear after a power interruption, check the CP 516’s yellow battery indicator and the rack’s backup supply. Recording the battery status helps distinguish a retention problem from a card fault.

After replacement, verify that the CP 1430 TF establishes the expected connections, or that the PLC can read the required sectors and blocks from the CP 516.

OtomasyonAVM resources and PDFs

Siemens SIMATIC S5 PLC guide · SIMATIC S5 memory cards

OtomasyonAVM SIMATIC S5 PDF archive

Related topics

256 KB long-format Flash EPROM cards · 6ES5 374-2FH21 · 6ES5 374-2KH21

S5 service and communications · S5 connection cables · S5 communications processors

Browse SIMATIC S5

Used Siemens SIMATIC S5 equipment › SIMATIC S5 › S5 memory cards

Siemens documentation and external references

Siemens CP 1430 TF and NCM COM 1430 TF manual · Section 4.1.4, 2AH21 RAM card and configuration memory

Siemens SIMATIC S5 CP 516 memory module manual · RAM cards, sectors and battery backup

Siemens ST 50 S5-135U and S5-155U/H catalogue · CP 516 ordering data on p. 4/95 and CPU 948 card options on p. 4/29

Siemens SIMATIC S5-135U/155U system manual · Section 5.8, 374 Flash EPROM cards for CPUs