6ES5 436-6AA11

Siemens 6ES5 436-6AA11 – SIMATIC S5 Digital Input Module

Siemens 6ES5 436-6AA11 is a digital input module in the SIMATIC S5 family. Its role is to convert field signals into input states for the PLC program. Select a replacement by the complete order number within the S5 digital input module range.

The channel count, input voltage and wiring diagram for this exact code have not yet been verified against manufacturer documentation. Neither 32 inputs / 24 V DC nor 8 inputs / 220 V AC should therefore be treated as a confirmed rating. Match the card label to the electrical drawings of the existing Siemens S5 system.

Distinguishing 6AA11, 6AB11 and other 436 versions

The 1985 Siemens ST 53 ordering table lists 436-6AB11 as a separate order number. The AA / AB distinction matters; do not transfer the 6AB11 ratings to 6AA11.

The 436-4UA11 and 436-4UA12 are U-type modules. The 436-4UB12 and 436-7LA11 are also separate models. Sharing the “436” designation does not establish equal channel counts, front connections or rack compatibility.

Field signals and electrical connection checks

Before connection, establish the AC/DC signal type, rated voltage and common terminals from the label and drawings. Check which voltage the relay contact actually switches; a contact alone does not establish a 24 V DC signal.

Assess input current and accepted signal levels using the table for the exact model. A calculation based on Ohm’s law cannot replace the manufacturer’s input thresholds or permitted voltage range.

Check fuses and possible short circuits against the cabinet circuit. Do not assume that protective earth and an input common should be connected together. Review the grounding arrangement and sources of electromagnetic interference against the installation drawings.

Rack, connector and program address

Check the S5 rack type, rear connection and mechanical coding together. Do not select cables and connectors from the wiring of another 436 card. Compare any expansion interface modules with the equipment list as well.

Distinguish the system supply provided by the S5 power supply from the signal voltage applied to a field input. Do not change connections using unverified pin numbers, jumper positions or consumption figures for this model.

Compare the input address in the PLC program with the existing hardware addressing. During troubleshooting, follow the field signal, terminal connection and program bit separately. The About Siemens S5 PLC page provides broader family information.

Editor’s note

Start with a clear view of the 6AA11 marking. If the lettering is worn or the photograph blurred, take a moment to resolve it. Distinguishing AA from AB now is easier than dealing with an incorrect spare later.

An old description is not enough to confirm 32 inputs / 24 V DC. The manufacturer’s table for this code has not been verified. Establish the test voltage from the card markings and machine drawings before applying power.

Before removal, photograph the wire numbers and connector orientation. Older cabinets may contain later alterations, so wire colour alone is not a reliable record.

If an input is missing, work through the field contact, circuit supply, connection and program address before condemning the card. Establish the correct signal type before testing.

When buying a used Siemens card, request a complete label photograph and channel-by-channel test record. “Working” is incomplete information if the test voltage is unknown. Check for heat damage, loose connections and previous repairs too.

OtomasyonAVM resources and PDFs

+ S5 digital input modules · About Siemens S5 PLC

+ Siemens S5 shared PDF archive and operating manuals. A separate manufacturer datasheet for 6ES5 436-6AA11 has not yet been verified. The archive link does not establish that documentation for this exact code is available there.

Related topics

+ 6ES5 436-4UA11 · 6ES5 436-4UA12

+ 6ES5 436-4UB12 · 6ES5 436-7LA11: different 436 models, not direct substitutes.

Browse SIMATIC S5

+ S5 digital input modules · S5 racks · SIMATIC S5

+ Siemens S5 PLC · Siemens second-hand equipment

Siemens and external references

+ Siemens U Periphery – English; 6ES5 998-0PC22, Release 01. Sections 5.7–5.8, PDF pages 249–252 compare 436-4UA11/12 and 436-4UB11/12. This is not the 6AA11 datasheet.

+ Siemens S5-115U Programmable Controller Manual – English; EWA 4NEB 811 6130-02b. Covers the 436-7L family and S5-115U system context; it does not establish wiring or compatibility for 6AA11.