6ES5 254-4UA21

Siemens 6ES5 254-4UA21 MOBY-M ASM 255/1 Interface Module

OtomasyonAVM Siemens S5 PDF archive

+ Siemens SIMATIC S5 manuals and PDF files

The Siemens 6ES5 254-4UA21 is a MOBY-M identification interface for SIMATIC S5 systems. Exact-part listings identify it as ASM 255/1. In a MOBY-M system, a read/write station handles identification data on carriers such as pallets.

Module identification and troubleshooting

Use the full order number when selecting a spare from the S5 interface modules. The 254-4UB11 is listed as a MOBY-SP ASM 254/2. The 254-4UB21 also appears under MOBY-M and has a separate order number. Match the reader, cable and project to the exact label.

Start the installation check by recording the S5 CPU model. The CPU 944, CPU 928B and CPU 948 help distinguish different system families. Use the machine cabinet drawings to confirm the rack and slot occupied by the 4UA21.

Check whether the card sits in the central or expansion rack. A CR 700-0LB11 rack, 188-3UA21 central unit, 183-3UA12 expansion unit and 955-3LF12 power supply have separate labels. Use the installation documentation for the module supply voltage.

If other cards in an expansion rack are also inaccessible, check the rack interface, such as IM 306, IM 312 or IM 307, and the associated S5 cabling. If the issue affects only the identification station, start with the reader, cable and a known-good data carrier.

If the machine monitors pallet presence through an external sensor, check the relevant S5 digital input, for example on a 420-4UA11 input card. If the station receives its enable or start signal from a separate output, use the cabinet drawings to identify the S5 digital output channel, for example on a 441-4UA14 output card.

Editor’s note

For a used card, request a photo of the 6ES5 254-4UA21 label, the hardware revision and the front panel. Use the full order number to select the spare.

After isolating cabinet power, label the card slot and plug positions. Record the exact reader and data carrier models.

If reading fails, try a known-good carrier at the same station. Observe carrier detection and data reading as separate steps.

If the read command fails, check the request, completion and fault states in the existing STEP 5 project. Use addresses from the working project or cabinet documentation.

For a used-card purchase, ask to see a read cycle with the installed type of reader. Use a separate test carrier if a write test is required.

Related topics

+ IP 288 position module

+ IP 242 counter module

+ CP 530 SINEC L1

Used Siemens equipment

+ SIMATIC S5 special modules

+ Siemens SIMATIC S5

+ Used Siemens equipment

+ Used automation equipment

If you have this module to sell, email a label photo, quantity and known condition to otomasyonavm@gmail.com.

External sources

+ INT Technics · 6ES5 254-4UA21 ASM 255/1 part listing

+ TPCOVN · 6ES5 254-4UA21 MOBY-M IFM, p. 10 · English PDF

+ Siemens · MOBY-M pallet identification example, §4.6.1 · English PDF

The Siemens guide describes a MOBY-M application. An exact-code manufacturer datasheet for the 4UA21 pinout, supply voltage, channel count and STEP 5 address table remains unverified.