6ES5 374-2KL21
Siemens 6ES5 374-2KL21 SIMATIC S5 Long Flash EPROM Memory Card, 2 MB
The Siemens 6ES5 374-2KL21 is a 2 MB, long-format, 5 V only MC 374 Flash EPROM memory card for SIMATIC S5. It retains the user program and data blocks when power is removed. Siemens lists this order number in the ST 50 memory card tables for the S5-135U/155U CPU 948 and S5-155H CPU 948R/948RL. This generation uses 5 V for both reading and writing.
The STEP 5 program on a CPU 948 runs in internal CPU RAM. During an overall reset, the CPU copies the contents of the fitted card into RAM. Edits subsequently made through the programming device connection do not update the card automatically. Save the running program and the card contents separately before servicing.
Listed CPU and rack configurations
Page 4/29 of the ST 50 catalog lists the 374-2KL21 alongside the 6ES5 948-3UA11 and 6ES5 948-3UA21 CPUs. They have 640 KB and 1,664 KB of internal user memory, respectively. In an S5-135U central controller or an S5-135U/155U central rack, check the CPU’s own order number. Card capacity does not change the CPU’s RAM limit.
The S5-155H ordering table lists the 948R 3UR12, 948R 3UR22 and 948RL 3UR51. In this S5 rack configuration, the card fits the receptacle on the front of the CPU. Record which card belongs to each CPU and follow the system’s COM 155H procedure when replacing a card.
The catalog lists the 128 KB 374-2KG21 for the CPU 928 3UA21 and CPU 928B 3UB21. It lists short cards such as the 374-1KH21 for the S5-115U CPU 945. Check the receptacle type and supported capacity in the CPU’s ordering table when selecting a spare.
Preparing the card on a programming device
Siemens lists the 6ES5 985-2MC11 programming adapter for CPU 948 memory cards. The 5 V only product notice specifies STEP 5 V6.6 for programming the new generation. Prepare the card offline on a compatible programming device (PG). Flash is electrically erasable. After writing, read the blocks back and compare them with the source.
Identifying similar memory cards
In the long 5 V Flash range, the 374-2KH21 holds 256 KB, the 374-2KK21 holds 1 MB and the 374-2KL21 holds 2 MB. Siemens lists the 374-2KL21 as the 5 V only successor to the 374-2FL21. Earlier Flash cards such as the 374-2FH21 use 12 V for writing.
The 2KL21 measures 54 × 85 × 5 mm and weighs about 50 g. The 374-1KG11 is a short 5 V Flash card. The 374-1FH21 and 374-1FJ21 are short Flash cards from the earlier generation. The 374-2AH21 is a long RAM card. Check the memory type, card length and voltage generation on the label.
Editor’s note
Record the card and CPU labels together. Capture the 374-2KL21 suffix and the complete CPU order number. Pay particular attention to the letter that distinguishes 2KL21 from 2FL21.
Compare both backups before an overall reset. Save the latest CPU RAM blocks separately from the Flash readback. An older Flash copy can be restored to RAM during the reset.
Confirm that the PG detects the card before writing. Check 5 V only card support, the STEP 5 version and the adapter connection.
Read the spare card back before fitting it. Compare its block directory and contents with the approved STEP 5 file. Label the card with the machine and project revision.
Identify the master and standby in an S5-155H. Record both card contents and their CPU positions. Follow the site’s COM 155H procedure for replacement and synchronisation.
OtomasyonAVM resources and PDFs
SIMATIC S5 memory cards · About Siemens SIMATIC S5 PLC systems
OtomasyonAVM SIMATIC S5 PDF manual archive
Related topics
374-2KK21 1 MB Flash · 374-2KH21 256 KB Flash · CPU 948 6ES5 948-3UA21
Browse SIMATIC S5
Siemens SIMATIC S5 · S5 memory cards · SIMATIC S5 CPUs
Siemens and other external references
Siemens 4202137 technical notice for 5 V only Flash cards (German, read/write voltage, STEP 5 and superseded parts)
Siemens ST 50 CPU 948 and memory card ordering table · Siemens ST 50 S5-155H memory card ordering table
SIMATIC S5-135U/155U System Manual, section 5.8 · SIMATIC S5-155H Manual, section 9.6