6ES5 375-0LD31
Siemens SIMATIC S5 375 RAM Module 32 KB — 6ES5 375-0LD31
The Siemens 6ES5 375-0LD31 is a plug-in SIMATIC S5 375 RAM submodule with 32 KB (32,768 bytes) of storage. Siemens lists this order number for the S5-115U CPU 942, S5-115H CPU 942H, CP 530 and CP 521 BASIC. It uses volatile RAM, so retention depends on the host unit’s backup supply.
What the module holds depends on where it is fitted. In a CPU 942 it holds the STEP 5 control program. In a CP 530 it holds SINEC L1 parameters, and in a CP 521 BASIC it holds BASIC programs or initialization data. Before making a backup, record the order number of the S5 CPU or communications processor that holds the module.
S5-115U and S5-115H compatibility
Table 2-8 of the S5-115U manual lists the 32 KB 0LD31 under CPU 942. The CPU 941 column lists the 8 and 16 KB RAM options. The CPU 943 and CPU 944 provide their program memory in internal RAM. Check the CPU table for usable program space as well as the submodule’s stated capacity.
In an S5-115H system with CPU 942H, Siemens requires the memory submodules in both CPUs to have the same order number. For a redundant system, follow the standby and COM 115H sequence in §11.6.2 of the system manual when replacing RAM.
Use in the CP 530 and CP 521 BASIC
The manual for the compact CP 530 6ES5 530-3LA11 and block-type CP 530 6ES5 530-7LA11 lists the 0LD31 as 32 KB RAM. Save SYSID, the master polling list and any interrupt list from COM 530. Siemens states that RAM data is lost when the CP 530 is removed from the central rack.
Table 2-2 of the CP 521 BASIC manual lists the 0LD31 as 2 × 16 KB RAM. It can store BASIC programs or initialization data. In an S5-100U expansion system, check that the host CPU supports the CP 521 BASIC. Leave the memory submodule in place while the CPU is in RUN.
Backup power and memory selection
Before connecting the programming cable, identify which unit holds the data you need. For an S5-115U, check the backup battery in the rack power supply, such as the PS 951. On a CP 521 BASIC, check its BATTERY OFF/LOW indicator. During troubleshooting, verify the memory contents before performing an overall reset or reload.
In the RAM family, the 6ES5 375-0LD11 has 8 KB, the 6ES5 375-0LD21 has 16 KB, and the 0LD31 has 32 KB. The 6ES5 375-0LA41 is also 32 KB and uses EPROM. The 6ES5 375-0LC31 and 6ES5 375-0LC41 use EEPROM. Match the memory type and capacity to the host module’s compatibility table.
Editor’s note
Identification. Check the 375-0LD31 marking against the maintenance record. Similar housings can contain different memory types.
Slot record. Photograph whether the submodule is fitted in the CPU or the CP before removal. Read the backup from the unit that holds it.
Verify the contents. Save any readable program or configuration to a separate file. Confirm that the backup opens and belongs to the correct system.
Redundant systems. Match the memory order numbers in both S5-115H CPUs and verify standby status before starting the procedure.
First check. Restore the CPU program or CP parameters after replacement and check the host unit’s status. On a CP 530, verify that the SINEC L1 stations respond.
OtomasyonAVM resources and PDFs
SIMATIC S5 memory submodules · S5-115H CPU 942H · OtomasyonAVM S5 PDF archive
SIMATIC S5-115H system manual — Table 1-1, permissible memory submodules
Related topics
375-0LD11 RAM · 375-0LD21 RAM · 375-0LA41 EPROM · CP 521 BASIC
Back to the S5 range
S5 memory submodules · S5 communications modules · Siemens SIMATIC S5
If you have an S5 memory submodule to sell, send a label photo, quantity and operating condition to otomasyonavm@gmail.com.
Siemens and external references
Siemens 6ES5 375-0LD31 data sheet — 32 KB RAM · Siemens S5-115U — Table 2-8, CPU and memory compatibility
Siemens CP 530 — §1.2.4, memory submodules · Siemens CP 521 BASIC — Table 2-2, memory submodules