6ES5 440-8MA21
Siemens 6ES5 440-8MA21 — 4-Channel 24 V DC / 2 A Digital Output Module
The Siemens 6ES5 440-8MA21 is a 4-channel, 24 V DC / 2 A digital output module used in the compact SIMATIC S5 I/O arrangement. Within the S5 digital output range, it is a non-isolated model with four channels sharing one supply group.
The permitted load supply range is 20–30 V DC. The module has electronic short-circuit protection. Be aware that an output can automatically resume operation when the short circuit is removed. Apply the 2 A per-channel rating together with the 4 A total limit for the board.
Load current and switching
Calculate the combined current of all four outputs. Four simultaneous 2 A loads would total 8 A and exceed the limit. Check pickup current for relays and contactor coils; select a suitable interposing relay and socket where required.
Maximum switching frequency is 100 Hz with resistive loads and 2 Hz with inductive loads. A suitable load current alone does not make this board a high-speed pulse output.
Short-circuit protection and the F LED
The red F LED can indicate a short circuit or a missing L+ load supply. Do not immediately attribute this indication to a failed output transistor. Check the fuse, supply wiring and load circuit together.
These outputs are not potential-free relay contacts. Compare the NPN/PNP wiring principles, M return and cabinet grounding with the diagram. Electronic protection does not replace the external protection required for the load and cables.
Terminals and addressing
The Siemens diagram identifies terminal 1 as L+ and terminal 2 as M. The four loads connect across terminal pairs 3–4, 5–6, 7–8 and 9–10 respectively: odd-numbered terminals are outputs and even-numbered terminals are M returns. Record cable and terminal labels before removal.
The front markings .0/.4, .1/.5, .2/.6 and .3/.7 do not mean that the board has eight outputs. Match the compact S5 arrangement and addresses in the PLC program to the installed configuration. During troubleshooting, check the address command, L+/M supply and output operation under load separately.
Comparison with related models
The 440-8MA11 and 440-8MA12 are four-output models in the 0.5 A class; appearance alone does not make them substitutes for this 2 A model. For the 440-8MA22, compare revision and diagnostic features against the manual for the installed CPU or station.
The 441-8MA11 is a different eight-output model. The 451-8MA11 has isolated DC outputs, while the 452-8MR11 has relay outputs. Select a spare using the full order number, output current, addressing and terminal arrangement together.
Editor’s note
Let us keep the 2 A channel rating in perspective before connecting four loads. The board’s total limit is 4 A. Writing down the currents first makes it easier to see the actual operating conditions.
When the F indicator lights, start with the L+ supply. A healthy board can also report a missing supply. Checking the cable, terminals and fuse may save an unnecessary replacement.
Short-circuit protection is not a reason to leave a faulty load connected. The output can resume operation once the short circuit clears. Switch off power and find the cause rather than repeatedly exposing the board to the same fault.
Before removal, photograph the label, slot and connections, and back up the program. Record the paired address markings as well. Documenting the original arrangement now is easier than reconstructing it from memory later.
For a used digital output board, ask for all four channels to be tested with suitable loads. Agree on the test voltage and current. Include operation under load alongside the LED check.
OtomasyonAVM resources and PDFs
+ About Siemens S5 PLCs · S5-115U PDF archive. Manufacturer ET 100U and ET 200U manuals covering this model appear below.
Related topics
+ 440-8MA11 · 440-8MA12 · 440-8MA22 · 441-8MA11 · 451-8MA11
Browse SIMATIC S5
+ S5 digital output modules · SIMATIC S5 · Compact S5 modules · Used digital I/O modules · Siemens second-hand equipment
Siemens and external references
+ Siemens ET 100U manual — 2-25: exact 440-8MA21 code, specifications and terminal diagram (English)
+ Siemens ET 200U manual — 8-28: 440-8MA21, 4 A total limit, protection and F LED (English)