6ES5 927-3KA13

Siemens 6ES5 927-3KA13 – S5-150K central processor board

Siemens 6ES5 927-3KA13 is the 927-3K processor board used in the SIMATIC S5-150K / ZG 150K central controller. It belongs to the compact K design within the Siemens S5 PLC family. Together with 925-3KA12 and 926-3KA12, it forms a three-board central processor assembly. It must not be treated as a complete standalone PLC.

This CPU assembly contains a microprogrammed word processor and memory for flags, timers, counters, system data and the input/output process image. User-program storage and the programmer connection are separate parts of the installation.

Program memory and system structure

The ZG 150K arrangement uses 340 or 350 memory boards with suitable RAM/EPROM configurations. The manual distinguishes the 370 EPROM submodule holding the operating system from user-program memory. When assessing S5 memory products, keep the operating system, program storage and backed-up system data separate.

Do not select a 927 board on the assumption that it provides a particular standalone user-RAM capacity. Check the installed memory board, submodules and auxiliary hardware against the system records. Suitable battery backup matters for RAM contents that must be retained.

STEP 5 and programmer connection

The S5-150K operation set is a subset of the STEP 5 operation set. Do not assume support for every instruction available on another S5 CPU. Preserve the existing blocks, calls and hardware arrangement during PLC programming work.

The manual's system diagram routes programmer access through a separate 511-5 programmer interface. Do not assign an integrated standard PG socket or Ethernet port to the 927 board. Match the programming cable, interface board and PG together. Assess communication modules separately for other device connections.

Timers, counters and I/O structure

The 150K central processor assembly's specification lists 128 timers, 128 counters and 2048 flags. Its addressing capacity is 1024 digital inputs and 1024 digital outputs. These are not physical field terminals on the 927 board.

Digital inputs, digital outputs and analog I/O use separate modules. Signal voltage, channel count and measurement range depend on the selected module. The manual's typical 5 µs binary-operation time also refers to the processor assembly; it must not be presented as the machine's total scan time.

Supply and board weight

Siemens groups the 925-3 / 926-3 / 927-3 assembly under one specification heading, listing a 5 V ±5% supply and typical 6 A consumption. The 6 A figure is not a separately specified consumption for the 927 board alone. The same table gives approximately 0.35 kg per board.

Assess PLC power-supply capacity for all three boards and the other installed modules together. Appropriate 150K rack installation, operating fans, connectors and grounding are part of the maintenance check.

Indicators and jumpers on the 927

On 927-3KA13, the green “Betrieb” indicator shows program processing, while the red “Stop” indicator shows the central unit in STOP. The yellow “Neustart erforderlich” indicates that the next start must be a cold restart or, where required, an overall reset through the PG. The Betrieb/Stop switch and Wiederanlauf button are on 926-3KA12.

The manual gives a separate table for the 927's Br.1–Br.5 jumpers. They concern signal and operating-system functions rather than ordinary I/O address selection. Record the existing arrangement and use the drawing for the exact board version.

Differences from other 927 order numbers

6ES5 927-3SA11 belongs to the S design, while 6ES5 927-5BA12 and 6ES5 927-5BA13 belong to a different 150A arrangement. Do not overlook KA, SA and BA suffixes when selecting a spare. Sharing the “927” name does not establish interchangeability. See About Siemens S5 PLC for family context.

Editor's note

Start by photographing all three labels: 925, 926 and 927. Buying a 927 board alone does not complete the CPU; operation also depends on the other two boards, memory and supply.

Record the operating-system EPROM alongside the program backup. User programs, system data and the operating system serve different purposes; a good copy of one does not preserve the others.

If the yellow restart-required indicator is on, investigate the battery, installed memory and reason for the stop before attempting an overall reset. Preserve any recoverable program and data first.

During fault finding, read the indicators on the 927 and the operating controls on the 926. Establish the assembly's division of functions before diagnosing a missing switch or an apparent board fault.

Photograph jumper positions before changing anything. Do not confuse Br.1–Br.5 with jumpers on neighbouring boards; some listed points are for servicing or testing and must not be bridged at random.

When buying used Siemens equipment, request a test record from a suitable 150K assembly. Check fans, the power supply and rear connectors too. A photograph of the board is not a substitute for testing with a user program.

OtomasyonAVM resources

Browse the 6ES5 927-3KA13 model page, S5 CPU family, memory products and used Siemens equipment. An archived German copy of the manufacturer manual for this system is linked below.

Related topics and models

+ 6ES5 925-3KA12: part of the 150K three-board processor assembly.

+ 6ES5 926-3KA12: part of the same assembly, carrying the operating/STOP controls.

+ 6ES5 927-3SA11: a 927 order number for the different S design.

+ 6ES5 927-5BA12: a different 927 order number for 150A; not a direct substitute.

Other S5 equipment

Siemens S5 PLC · CPUs · Memory · Interfaces · Cables · Racks · Used Siemens equipment

Manufacturer document and external reference

+ Siemens SIMATIC S5 Zentralgerät 150K Betriebsanleitung – C79000-B8500-C228-04, German: archived copy of the manufacturer manual. Pages 3–6 cover the three-board structure and programming; 11 covers indicators, 12 jumpers and 24 the complete order numbers. The specification is on printed page 7, which is PDF page 9 in this copy.