6ES5 900-7AC21
Siemens 6ES5 900-7AC21 – SIMATIC S5-110A CPU 900
Siemens 6ES5 900-7AC21 is a CPU 900 central processing module used in SIMATIC S5-110A systems. This early-generation processor in the Siemens S5 PLC family executes machine logic and works with rack-mounted I/O. In the S5-110A architecture, the program is processed from a 910 EPROM memory submodule fitted to the CPU.
Applications include evaluating pushbuttons, limit switches and machine states, and controlling contactors, valves and operating sequences. The CPU works with separate field I/O modules; assess the installed modules and machine program together.
7AC21 version and specification scope
Exact program capacity, instruction timing and retentive flag characteristics require documentation covering the complete 7AC21 version. The CPU specification table in the available Siemens S5-110A family manual identifies 6ES5 900-7AD11. Its capacity and timing figures should not be presented as confirmed 7AC21 specifications.
6ES5 900-7AB11 and 6ES5 900-7AB21 are other CPU 900 order numbers. A similar enclosure does not establish interchangeability in program memory or data-retention behaviour.
STEP 5 program and EPROM memory
S5-110A processes STEP 5 instructions sequentially and cyclically. The family manual explains that one instruction occupies two 8-bit memory locations. Consequently, instruction capacity and Kbyte capacity are different quantities; establish what a seller means by a “2K” description.
Check the complete memory submodule order number, program content and CPU version together. A PLC programming backup should preserve the EPROM content, electrical drawings, address schedule and available program listing. Do not select another S5 family's memory card solely because it looks similar.
Mounting rack and addressing
S5-110A uses a 75 mm sectional rail with prewired module sockets. Distinguish this arrangement from modern 35 mm DIN rail hardware when selecting an S5 rack. The family includes the standard-length 6ES5 710-0SA11 and the longer 6ES5 710-0SA41 mounting racks.
Addressing relates to the socket position occupied by the module. Siemens states that the first I/O position starts at 0 on later racks and 1 on earlier racks. Compare the actual socket markings with the program addresses before replacing a rack.
Signal voltage, channel arrangement and output capacity depend on the individual digital input and digital output module order numbers. Inspect supplementary timing and counting hardware, such as the 380, 381 and 383 modules, separately.
Power supply arrangement
S5-110A uses an internal logic supply in the 5 V DC class, provided by a 930 power supply module. Do not apply the external mains or 24 V supply directly to the CPU. Assess all installed modules when selecting the appropriate PLC power supply.
6ES5 930-7AA12 and 6ES5 930-7AA31 are family examples with different input supplies; follow the power supply's own label. Check sensor and contactor power separately from the internal CPU supply. Include cabinet grounding and connection condition in fault investigation.
Programming and test connections
The Siemens family manual describes the 500 programmer interface for online operation with PG 630/631/670 programmers. This arrangement uses a parallel TTL interface. Cable assumptions from serial PG connections on other S5 CPUs should not be transferred to this system.
Match the interface module and connecting cable to the actual programmer arrangement. The family's 6ES5 330-7AB11 test module supports examination of program sections and single-step execution. The 332 test adapter helps display signal states and logic results at selected addresses.
If the installation includes separate communication equipment, identify its connections and role independently. During fault finding, assess CPU STOP status together with the power supply indicator, memory and suitable test equipment. Further family background is available in About Siemens S5 PLC.
Editor's note
Read the complete label: 900-7AC21. A general “CPU 900” description is insufficient for selecting replacement hardware. In particular, avoid treating a 7AD11 specification table as a complete specification for this board.
Photograph the EPROM label as well. A CPU sold separately may arrive without the machine program. Establish the memory capacity and program content rather than estimating them from the enclosure.
Preserve the program before attempting to erase or reprogram memory. If the operating machine's EPROM is the only copy, arrange a suitable readout and backup first.
If a battery is fitted, inspect it and the surrounding area for corrosion. Retaining the EPROM program and retaining working flag data are separate matters; confirmation of one does not establish the other.
Keep the 930 power supply input distinct from the CPU's internal supply. For a STOP condition, investigate internal power, socket contacts, memory and addressing before concluding that the processor has failed.
When buying used Siemens equipment, request complete labels, memory details and preferably a test record from the same S5-110A arrangement. Disconnect power before removing or inserting hardware, and prepare the correct interface before connecting test cables.
OtomasyonAVM resources
Browse the 6ES5 900-7AC21 model page, used Siemens S5 models, S5 processors and memory modules. The Siemens document below explains the S5-110A family architecture; it is not a dedicated 7AC21 specification sheet.
Related topics and models
+ 6ES5 900-7AB11: another CPU 900 order number.
+ 6ES5 900-7AB21: for comparing CPU and memory versions.
+ 6ES5 900-7AD11: the CPU version identified by the family manual's technical table.
+ 6ES5 330-7AB11: an S5-110A test module; it does not replace the CPU.
+ 6ES5 710-0SA11 and 6ES5 710-0SA41: family mounting racks. These links do not establish replacement compatibility.
Navigation
S5 CPUs · Memory · Racks · Cables · Interfaces · Power supplies · Used Siemens equipment
Manufacturer document and external reference
+ Siemens SIMATIC S5-110A Operating Instructions – GWA 4NEB 807 0690-02, English: family architecture and rack on PDF pages 6–7; program execution on 8; CPU section explicitly headed 7AD11 on 9; EPROM on 10; 500 interface on 13; test equipment on 14. Maintain the distinction between family coverage and the exact order number.