6ES5 710-0SA11

Siemens 6ES5 710-0SA11 – S5-110A Mounting Rack for 8 I/O Modules

Siemens 6ES5 710-0SA11 is a standard-length mounting rack with bus cable for the S5-110A in the SIMATIC S5 range. It accommodates a power supply, CPU and up to eight input/output modules. Within the S5 rack and mounting hardware range, it provides the mechanical mounting and module bus connections.

It has ten module positions in total, eight for I/O, and weighs approximately 1.53 kg. The mounting profile measures 482.6 × 75 × 25 mm. Allow separately for the height and depth of fitted modules and for cable clearance when planning the cabinet.

Bus cable, CPU and power arrangement

Inspect the rack together with its bus cable, sockets and retaining parts. Treat the S5 power supply, 6ES5 900-7AD11 CPU and memory submodules as separate items, and record exactly which components are included in a used assembly.

When selecting digital input modules, check the full order numbers of S5-110A family modules such as the 6ES5 400-7AA13 and 6ES5 401-7AA13. Eight module positions do not by themselves define the number of field signals; that depends on the channels provided by the fitted modules.

For digital output modules such as the 6ES5 410-7AA11, examine field power and load wiring separately. Check space requirements and the existing configuration before adding function modules. Physical space alone does not establish electrical compatibility with every S5 module.

Inter-rack connections and addressing

The manufacturer lists the 0.32 m 6ES5 711-0AD20 connection for racks arranged one above another. Select S5 cables and connectors by rack type, connector orientation and cabinet layout together. Avoid stretching a cable into place or leaving a constant mechanical load on its sockets.

I/O position coding on the 0SA11 starts at zero. When comparing the longer 6ES5 710-0SA41 with the earlier-coded 6ES5 710-0AA11 and 6ES5 710-0AA41, check the position markings. In the Siemens S5 PLC architecture, the socket address must match the address expected by the program.

Mounting and system checks

Fix the rack to a sound surface without distorting it. Check mounting holes, socket alignment and cable routing. Measure the power supply and return connection before attributing a fault affecting several modules to the rack. Disconnect system power before removing or fitting modules.

If several sections are affected, inspect the bus connections and any S5 interface modules in sequence. During PLC troubleshooting, make controlled comparisons with known-good modules and distinguish module, socket, cable and supply faults.

Editor’s Note

Look beyond the aluminium profile when buying a rack. Missing bus cables, socket assemblies or retaining parts can leave you with an incomplete spare. Ask for photographs showing everything included in the assembly.

Inspect the sockets closely. Cracked plastic, recessed contacts, corrosion and loose retainers deserve attention. They are particularly relevant when a fault clears after moving a module and then returns later.

Before removing the old rack, photograph its full label, position numbers and cable orientation. Do not identify SA and AA versions by appearance alone; record the addresses used by the existing program as well.

Do not use the mounting screws to pull a bent rack straight. Keep the profile flat and the sockets aligned so modules fit without force. Give the bus cable enough slack to avoid strain at its connections.

Make the final check with a working assembly. Use a suitable supply, CPU and known-good I/O modules to test every position that will be used. One working socket does not prove the condition of all the others.

OtomasyonAVM resources and PDFs

+ S5 racks and mounting hardware and the SIMATIC S5 main directory: mounting components, systems and related models.

+ OtomasyonAVM shared S5 PDF archive: general S5 documentation. Check that the chosen document covers the S5-110A and the exact rack number.

Related topics

+ S5 cables and connectors · 710-0SA41 extended mounting rack · 900-7AD11 CPU.

Browse SIMATIC S5

S5 racks | S5 module directory | SIMATIC S5 | Siemens S5 PLC | Siemens second-hand main page

Siemens and external references

+ Siemens S5-110A manual – English: 6ES5 998-0AA22, Issue 1; operating instructions GWA 4NEB 807 0690-02. §1.4, printed page 1.11 / PDF page 15: capacity, profile dimensions, coding and weight; §2 for mounting and addressing.

+ Siemens S5-110A spare-parts table – English: printed page 6.1 / PDF page 37, exact 710-0SA11 entry, bus-cable scope and rack connection cables. Siemens document copy hosted by ADEGIS.