Delta AH16AN01P-5A

Delta AH16AN01P-5A – 16-Point PNP Output Module

The Delta AH16AN01P-5A is an expansion module with 16 PNP transistor outputs for the Delta AH500 PLC system. Delta lists an output voltage of 12–24 V DC. For resistive loads, the limits are 0.5 A per output and 4 A per common. Field wiring connects through a removable JIS terminal block.

This AH digital output module controls compatible DC indicators, auxiliary relay coils and valve banks. When active, a PNP output supplies current to the positive side of the load. See sink and source wiring for the current paths.

UP/ZP wiring and output addresses

Supply and load wiring The Delta hardware manual specifies a nominal 24 V DC auxiliary supply for UP and ZP. Connect supply positive to UP and the 0 V return to ZP. For output 0, connect the load between the output terminal and 0 V. Calculate field load current separately from the AH rack supply.

Addressing Check the module slot and Y start address in ISPSoft HWCONFIG. The module occupies 16 output bits. A start address of Y0.0 gives a last output of Y0.15. Connect online through COMMGR to compare each commanded output bit with its module LED.

PDF manual Delta AH500 Hardware and Operation Manual (English). The AH16AN01P-5A terminal diagram is in section 4.7.7, on PDF page 208. Output addressing is in section 5.4.1. See Delta AH PLC PDF Files for further documentation.

Editor’s Note

On a used module, confirm the P-5A suffix and check that the removable terminal block is included.

If the command bit and LED turn on but the load does not energise, measure the auxiliary voltage between UP and ZP under load.

On the bench, test all 16 outputs in turn with a suitable 24 V DC test load. Match each point to its LED and PLC Y address.

Add the current of loads that can run simultaneously. Apply the 4 A common limit as well as the 0.5 A per-output limit.

For relay coils or solenoid valves, check inrush current and switching transients. Fit suppression appropriate to the coil at the load.

Related Topics

Related modules The AH16AN01T-5A provides 16 NPN outputs, the AH16AN01R-5A provides 16 relay outputs, and the AH16AN01S-5A provides 16 AC triac outputs. The AH32AN02P-5A provides 32 PNP outputs rated at 0.1 A per point.

See the AH16AM10N-5A for projects that also require a separate input module. For small stand-alone control tasks, see the Derell DLC-R1210-2I-R-A smart relay.

AH expansion modules · AH analog modules · Delta PLC software · Delta PLC and HMI manuals · Delta PLC · Second-hand Delta products

External References

Delta AH Series manufacturer catalogue (2024)