Delta PLC 2
Delta PLC series, software and PDF manuals
Start with the full model code on the CPU label. Choose the Delta PLC family to find compatible I/O modules, programming software and wiring documentation.
Delta DVP PLC series
Compact machine control and installed DVP systems. CPUs, digital and analog expansion modules, and series documentation.
Delta AS PLC series
Compact modular automation. AS200, AS300, expansion modules and AS500 motion controllers.
Delta AH PLC series
Modular panel and process control. AH500 CPUs, I/O modules, motion control and redundancy options.
DVP PLC PDF files · PLC software · Device description files · PLC accessories
Which software programs a Delta PLC?
Many DVP models use WPLSoft. ISPSoft is available for supported DVP, AS and AH projects. Set up the PC connection through the COMMGR channel required by your software. Check CPU support before using DIADesigner. Use TPEditor for supported TP panel screen projects. See PLC programming and ladder diagrams for the basics.
Check the CPU port before choosing a cable. RS-232 and other serial interfaces differ in their connections and electrical standards. See the Delta PLC cable guide for the exact model and port.
Choosing I/O modules and a field network
When adding a module, check the DVP expansion range and the matching CPU manual. Review digital and analog inputs, the analog signal range, PNP/NPN sensor wiring and the sink/source common terminal. Choose relay or transistor outputs to suit load voltage, current and switching frequency.
Use remote I/O to collect inputs and outputs over a network from another section of the machine. See DVP remote I/O modules and Delta TP panels and remote I/O for model details. For network selection, see industrial communications, Modbus over RS-485, Modbus RTU and EtherCAT.
Select the EDS file for the device’s CANopen or DeviceNet network and engineering tool. GSD is used for PROFIBUS DP. GSDML describes PROFINET devices. Match the file and revision to the module’s full part number.
Editor’s Note
When buying a used CPU, ask for photos of the label, ports and expansion connector.
Back up the PLC program, any HMI project and the network settings before replacement.
Mark the modules before removal. The original order and terminal layout help when troubleshooting.
On the bench, check the PC connection first, then test one input and one output. Measurement and testing guide
If I/O faults begin when a drive starts, check signal cable routing, shield connections and cabinet grounding.
OtomasyonAVM manuals and related pages
Delta PLC and HMI manuals · Delta TP panel PDF files · Used Delta Automation