Servo motor drive prices
![]()
A reliable budget starts with the right motor and drive pairing
When comparing prices for servo systems, establish whether the offer covers the drive alone or a motor and drive package. Two products with the same power rating can differ in supply voltage, feedback, communications and included accessories. For applications from 0.4 kW to 10 kW, build your budget around the machine requirements and full part numbers rather than the kW rating alone.
How to interpret a price example
An independent seller page checked on 16 October 2026 displayed TRY 22,449.71 including VAT for a Delta ASD-A2-0721-M, 750 W servo drive. This is a dated market example for the specified drive; it is neither an OtomasyonAVM quotation nor the price of a motor and drive package. Confirm the current price, availability, shipping and scope of supply before ordering.
This example cannot be scaled proportionally to estimate prices for 0.4 kW, 1 kW, 3 kW, 5 kW or 10 kW. Product series, hardware and commercial terms all affect the price, and manufacturers do not necessarily offer identical power steps. Compare offers with the same part number, tax basis and scope of supply.
Editor's note: A “750 W drive” cannot necessarily operate every 750 W motor. Check the manufacturer's approved motor and drive combinations. A seemingly cheaper product with incompatible encoder feedback or a missing connection cable can increase the installed cost and commissioning time.
Drive-only prices and package prices
A drive-only listing may exclude the servo motor, motor power cable and feedback cable. A package quotation should still specify cable lengths, connectors, brake connections and commissioning services. Assess new, used and repaired equipment separately, and request written confirmation of the warranty, test condition and complete model number.
Compatibility checks beyond the power rating
Check the supply voltage and phase configuration, continuous and peak output currents, and the manufacturer's motor compatibility table. Similar-looking connectors do not guarantee identical pin assignments. The motor's encoder, feedback protocol and resolution must match the drive. Review any absolute encoder requirement and the relevant encoder output types during selection; the number of feedback bits alone does not establish compatibility.
How the application affects the budget
Rapid indexing on a packaging machine and a continuously rotating feed axis require different sizing calculations. Evaluate continuous torque, peak torque, load inertia and cycle time together. Requirements for position control, speed regulation or torque control determine the operating modes needed. Loads that accelerate and decelerate frequently also require an assessment of regenerative energy and braking resistor capacity. Choosing an oversized power rating does not resolve incorrect mechanical sizing.
Command interfaces and communications
For PLC pulse-and-direction commands, match the high-speed pulse output to the drive's command input levels and permitted pulse frequency. Check the sink/source arrangement for digital I/O wiring as well. For network control, confirm EtherCAT or CANopen support against the complete drive part number. The presence of a communication port does not, by itself, confirm support for the required synchronized motion functions.
Brakes, protection and installation costs
When comparing servo packages with holding brakes and packages without brakes, assess whether the axis needs to hold its load. A motor holding brake serves a different purpose from a regenerative braking resistor; suitability for repeated dynamic stops depends on the manufacturer's instructions. Overcurrent and overvoltage protection also do not replace STO functionality. STO prevents torque generation; it does not provide electrical isolation or mechanically hold a load.
Include cables, connectors, filters, braking resistors and cabinet cooling in the overall budget. Check ambient temperature limits, mounting clearances and the enclosure protection rating for the selected model. Where mechanical transmission is required, account for servo gearbox prices; the selected ratio changes the motor's speed and torque requirements.
Information needed for comparable quotations
Provide the complete motor and existing drive part numbers, supply voltage and phases, load speed and torque requirements, brake configuration, command interface and cable lengths. Ask for explicit details of VAT, currency, delivery time, warranty and commissioning scope. This lets you compare the initial purchase price and total installed cost together and select a package suited to the application.
Related reading: How servo systems work, servo motors and stepper motors compared.
Sources
Sources were opened and checked on 16 October 2026. The price source is an independent seller; technical references are manufacturers’ documentation.
Elektron Mühendislik: ASD-A2-0721-M price and VAT information
Delta: ASDA-B2 motor, drive and accessory selection
Mitsubishi Electric: servo systems and sizing tools