6ES5 374-2KH21

6ES5 374-2KH21 Siemens SIMATIC S5 MC 374 Flash EPROM Memory Card, 256 KB

The Siemens 6ES5 374-2KH21 is a long-format MC 374 Flash EPROM card with 256 KB (262,144 bytes) of storage and a 16-bit data width. Both reading and programming use 5 V. Listed for the SIMATIC S5-155U CPU 948 and S5-155H CPU 948R/RL, this S5 memory card retains the STEP 5 user program and data when power is off.

The card holds a prepared set of blocks for a CPU replacement or program restore. During an overall reset, the CPU 948 copies the card’s blocks into internal RAM. Before maintenance, compare the version on the card with the latest changes in the CPU.

Which CPUs and communications processors use this card?

The Siemens ST 50 catalog lists this order number for the S5-155U CPU 948-3UA11 and CPU 948-3UA21. It also appears in the S5-155H ordering table for the CPU 948R/RL, including the CPU 948R-3UR22. An S5 rack family can house different CPUs, so check the order number on the CPU label.

For the S5-135U CPU 928-3UA21 and CPU 928B-3UB21, ST 50 lists the 6ES5 374-2KG21. That card has 128 KB of storage, of which these CPUs can use 64 KB. When using the shared S5-135U/155U system manual, refer to the ordering table for your CPU.

The catalog also lists the 2KH21 for S5 communications processors including the CP 544, CP 544B and CP 1430 TF. Keep the CPU program and CP configuration in separate files. To prepare a CP card, use the software and file format specified in the processor manual.

How is the 5 V Flash card programmed?

Siemens compatibility note 4202137 identifies the 2KH21 as the successor to the long-format 6ES5 374-2FH21. The earlier generation uses 12 V for programming and 5 V for reading. The 2KH21 uses 5 V for both. Check the label before selecting the programmer settings.

Use a compatible SIMATIC S5 PG card slot or programming adapter to program and electrically erase the CPU card offline. Siemens lists the 6ES5 985-2MC11 adapter in the CPU 948 ordering table. Siemens specifies STEP 5 V6.6 for programming this Flash generation. Read the programmed blocks back on the PG and compare them with the backup.

How does the 2KH21 differ from other 374 cards?

The 6ES5 374-1KH21 has the same 256 KB Flash capacity in a short housing. Siemens lists the short 1KH21 for the IM 308-C PROFIBUS DP master. The long-format 6ES5 374-2AH21 is a 256 KB RAM card.

In the same long-format 5 V Flash family, the 6ES5 374-2KK21 holds 1 MB and the 6ES5 374-2KL21 holds 2 MB. Check the CPU or CP ordering table before choosing a higher-capacity card.

Editor’s note

Read the 2KH21 suffix on the label and confirm the long housing. In a SIMATIC S5 cabinet, CPU and CP card slots can look similar. Record which device the card came from in the backup notes.

On the CPU 948, an overall reset clears the program and data in internal RAM. Save the latest blocks from the running CPU and make a separate copy of the Flash card before erasing it.

If the PG cannot read the card, check the software version, slot and adapter first. If an online block comparison drops out, check the PG interface and the appropriate S5 PG cable separately.

On the S5-155H, record the program version from the master and standby cards separately. Follow the S5-155H system manual for the replacement sequence and memory card checksum checks.

When replacing a CP 544 or CP 544B card, archive the COM PP project, the card contents and any driver files in use. Record the port settings and S5 connection cables separately in the maintenance record.

OtomasyonAVM resources and PDFs

SIMATIC S5 memory cards · About Siemens S5 PLCs

OtomasyonAVM S5 PDF archive

Related topics

374-2FH21 previous-generation Flash · 374-1KH21 short-format Flash · S5-155U CPU 948

S5 navigation

SIMATIC S5 › S5 memory cards

External references

Siemens 6ES5 374-2KH21 data sheet · Siemens 5 V Flash transition and compatibility note 4202137 (German)

Siemens ST 50 catalog, S5-135U and S5-155U/H · Siemens S5-135U/155U system manual, Section 5.8 · Siemens S5-155H system manual, Volume 1, Sections 3.1 and 9.6