6ES5 924-3SA12
Siemens 6ES5 924-3SA12 — S5-150S / S5-150U CPU 924 processing board
Siemens 6ES5 924-3SA12 is a CPU 924 processing board for SIMATIC S5-150S and S5-150U central controllers. This central processing board in the Siemens S5 family forms part of a multi-board CPU assembly. Select a spare using the complete order number and the installed board group.
The S5-150U manual shows 924S, 925S, 926S and 927S together, with the 924 family identified as central board 1. 925-3SA11, 926-3SA11 and 927-3SA11 are relevant boards when examining this system family. They should not be treated as alternatives to fit in place of a 924.
S5-150U slot arrangement
Siemens specifies fixed slots 35 for 924S, 43 for 925S, 51 for 926S and 59 for 927S in S5-150U. These are rack slot numbers, not I/O addresses or DIP-switch settings. This arrangement applies to S5-150U; do not transfer the slot numbers to S5-150S.
Program memory and peripheral modules
S5-150U uses 340/350 memory boards for the user program. The 924-3SA12 label alone does not establish RAM capacity or the installed memory hardware. Do not assume that a used CPU board is supplied with the machine program.
Assess digital inputs, digital outputs and expansion hardware within the system’s peripheral arrangement. Do not assign an I/O module’s 24 V channel voltage, channel count or output current to this CPU board.
Programmer connection and STEP 5
The S5-150U layout shows a separate 511-5 programmer interface board, specifically 6ES5 511-5AA12. Check the interface module, programming cable and programmer model together. When preparing for STEP 5 programming, do not assume that the 924 board provides a directly usable PG port.
Supply, fault-finding and replacement selection
The S5-150U central system has an internal 5 V supply. Measure at the appropriate test points specified in the system documentation. Distinguish the power supply’s input voltage from the CPU’s internal supply. Before fault-finding, record the S5 system’s board order, memory configuration and fault symptoms.
6ES5 924-3SA11 is a different order version. Do not declare 3SA11 and 3SA12 interchangeable without verifying the revision change. 927-3KA13 and 927-5BA12 belong to different S5-150 arrangements; a similar board appearance does not establish compatibility.
Editor’s note
When buying used Siemens equipment, inspect the 924-3SA12 label and both sides of the board. A listing saying only “S5 CPU” is insufficient; record the fitted IC markings and board revision.
Before removal, photograph the complete part numbers and order of the 924, 925, 926 and 927 boards. Preserve the installed assembly’s revision information when replacing one board.
Check for bent connector contacts, oxidation, cracked solder joints and previous repairs. Remove or insert the board with system power off and appropriate protection against static discharge.
If the system fails to start, check the supply, fans, backup condition and memory before condemning the 924. Obtain a program backup before attempting memory clearing or experimental restart procedures.
Test in a suitable S5-150S/150U board assembly with a documented program. Record any different PG interface version, such as 511-5AA14, by its full part number. Include the tested configuration alongside the result.
OtomasyonAVM resources and PDFs
6ES5 924-3SA12 model page · SIMATIC S5 CPU family · Used Siemens equipment. For other S5 documents, visit S5-115 PDF files. The applicable S5-150U manual and exact-part Siemens data sheet are linked below.
Related topics
+ 6ES5 924-3SA11 — a different CPU 924 order version.
+ 6ES5 925-3SA11 — a related S5-150S/150U central board.
+ 6ES5 926-3SA11 — a 926 board in the same system family.
+ 6ES5 927-3SA11 — a 927 board in the same system family.
Browse SIMATIC S5
Siemens S5 · S5 CPUs · S5 racks · S5 memory · S5 interfaces · S5 cables · Used Siemens equipment
Siemens and external references
Siemens Datenblatt — 6ES5924-3SA12 — 14 February 2020, German, 1 page. Externally archived Siemens document confirming the exact part and ZG 150S/150U application; no detailed electrical ratings table.
Siemens AG S5-150U — Handbuch, 6ES5998-0AL11 — German. PDF pp. 15–16: layout; p. 35: supply indicators; p. 47: central-board list. The list identifies the 3SA11 versions and does not explain the 3SA12 revision change.