6ES5 894-0MA02-0UG4

Siemens 6ES5 894-0MA02-0UG4 — STEP 5 V6.5 PC upgrade package

Siemens 6ES5 894-0MA02-0UG4 is catalogued as a PC software package for upgrading STEP 5 V3.x to V6.5 for SIMATIC S5 PLCs. Its ordering description specifies 3.5-inch diskette media, five user languages, MS-DOS V5.0 and delivery without documentation. When selecting this SIMATIC S5 software, check the existing STEP 5 installation and the contents of the original package.

The practical aim is to provide a PLC programming environment for maintaining an older machine. Working with the control logic associated with S5 modules also requires a suitable computer, connection hardware and documentation for the particular CPU.

Release, media and computer checks

V3.x to V6.5 identifies the upgrade described for this order number. Compare the complete article number, installed release, original media and any authorization documentation before purchase. Do not apply the installation or licensing procedure for a different STEP 5 package merely because its number looks similar.

MS-DOS V5.0 is the operating system named in the ordering description. It does not establish compatibility with every later DOS or Windows release. Computer startup, diskette readability and an online PLC connection should be checked separately. Obtain memory and disk-space requirements from the original product information for the actual release.

Five user languages refers to the software’s language options, rather than five IEC programming languages. Delivery without documentation also distinguishes the software media from a printed or separately supplied manual.

Program representation and I/O addresses

The STEP 5 family uses STL/AWL, LAD/KOP and CSF/FUP representations. General introductions to ladder diagrams and function block diagrams can help with reading the logic; the CPU and software release determine the available instructions and representation limits.

When reviewing a project, compare the addresses of the digital input modules and digital output modules with the cabinet drawings. An address in the program does not establish which module is physically installed.

Check raw-value interpretation for analog modules and each channel’s purpose on combined input/output modules against the relevant hardware documentation. A software upgrade does not change the signal range or electrical characteristics of an I/O module.

PLC connection and application scope

Select the S5 programming cable and interface hardware separately. Siemens’ S5-DOS/ST documentation describes suitable conversion between a computer’s V.24 port and the S5 TTY connection. A matching connector does not establish electrical compatibility.

For an S5-90U or another S5 CPU family, record the complete CPU number and existing connection arrangement. The STEP 5 name alone does not establish that one installation covers every CPU, port and optional software tool.

Communication modules and some special modules may require product-specific software or documentation. Likewise, do not assume that the basic package includes every commissioning tool needed for positioning modules or function modules.

Editor’s note

Look after the working maintenance computer first. Before trying the old disks, preserve the project directory and a record of the computer’s setup. Record the CPU memory module as well, and avoid making changes to your only surviving copy.

For this package, “Are the disks included?” is only the first question. Check the complete label numbers, disk sequence, release and authorization paperwork together. A readable disk is not proof of a complete, usable package.

If STEP 5 starts but cannot see the PLC, work through the port selection, converter and cable before blaming the software. Change one item at a time so the result tells you which part actually made a difference.

An output that does not operate calls for more than a software check. Compare the module positions in the S5 rack, the addresses and the field conditions. Start PLC troubleshooting by observing what is happening.

Keep the documented project separately from a program read back from the controller. Preserve symbols, comments and maintenance notes. The next person opening the files should be able to understand why the previous change was made.

With a used software package, media readability, successful installation and a tested PLC connection are separate findings. Establish which checks have actually been completed. Do not assume that manuals, cables or converters form part of the delivery.

OtomasyonAVM resources and PDFs

+ About Siemens S5 PLCs: background on the system and its maintenance.

+ Siemens S5 system manuals and PDF archive: CPU and module documentation. This archive link is not installation software or a license for 6ES5 894-0MA02-0UG4.

Related topics

+ S5 cables and connectors: identifying the PC-to-PLC connection hardware.

+ S5 memory modules: distinguishing program-storage hardware from the software package.

+ S5 communication modules: checking communication hardware and any associated software requirements.

Browse SIMATIC S5

Siemens S5 PLCs · SIMATIC S5 · S5 expansion products and existing catalogue group · Second-hand Siemens products

Siemens and external references

+ Siemens STEP 5 Version 6.6 Manual — C79000-G8576-C820-01, English. A later-release reference for STEP 5 operation, rather than the original V6.5 upgrade-package product information.

+ Siemens Working with S5-DOS/ST — C79000-G8576-C760-03, English. Supporting documentation for the V6.6-era PC/PG environment and connection hardware.

+ Siemens German S5 documentation index — 4 September 2003. Lists the STEP 5 V6.5 manual as C79000-G8500-C800-01, entry 1175533.