6ES5 410-7AA11
Siemens 6ES5 410-7AA11 — 8-Channel 24 V DC / 2 A Digital Output Module
The Siemens 6ES5 410-7AA11 is an 8-channel, 24 V DC / 2 A static digital output module for S5-110A and S5-110S systems. It is a galvanically isolated model within the digital output module range of the SIMATIC S5 family.
Nominal load voltage is 24 V DC; the Siemens table specifies a load supply range of 3–33 V DC. The maximum 2 A per-channel rating must be considered together with the temperature-dependent total loading limit. Where short-circuit protection is required, Siemens specifies an FF 2.5 A extra-fast fuse.
Total loading and temperature
The Siemens graph shows 16 A total at 20 °C and 8 A at 55 °C for all eight outputs. These are 100% and 50% of their combined nominal currents respectively. Calculate the current for simultaneous loads and check cabinet temperature rather than assessing one channel in isolation.
Do not assume every channel can operate at maximum current simultaneously as temperature rises. For loads remaining energized for long periods, assess pickup current separately from continuous current.
Fuse protection and switching
When replacing a fuse, match the FF 2.5 A rating and extra-fast characteristic. Do not treat this protection as electronic current limiting. If a fuse blows repeatedly, inspect the load and wiring before considering further operation.
Maximum switching frequency is 100 Hz for resistive loads, 11 Hz for lamps and 2 Hz for inductive loads. Observe these limits for relays and contactor coils; use a suitable interposing relay and socket where required.
Mounting, connections and address checks
The S5-110 module format measures 40 × 166 × 150 mm in width, height and depth. Compare the mounting rail and arrangement, cable connections and cabinet grounding with the existing drawing. Galvanic isolation does not make a static output a potential-free relay contact.
In the S5 90/110 arrangement, check the installed module position together with output addresses in the PLC program. During troubleshooting, examine the program command, load supply, channel fuse and voltage at the load in sequence. Do not directly apply another S5 board’s terminal arrangement.
Comparison with related models
The 410-7FA11 and 410-0AA41 are different order numbers. Do not select a direct replacement from the 410 designation or housing alone; compare the system, channel arrangement and electrical ratings against the complete code.
The 415-7AA31, 415-7AB11, 415-7AB21 and 417-7AA21 represent other output options. Check DC, AC and relay-output models against their own load, supply and wiring requirements. These links do not establish interchangeability.
Editor’s note
Keep cabinet temperature beside the 2 A rating when assessing this board. Siemens’ 50% total loading condition at 55 °C matters: a load that looks suitable on paper can still put the board under strain.
If a fuse blows, let us find the cause first. Check the coil, wiring and terminals rather than fitting a larger fuse to keep things running. The FF characteristic matters as much as the current rating.
If an LED lights but the load does not operate, check the load supply and channel fuse before replacing the board. Receiving a command and actually energizing the load are separate checks.
Photograph the label, slot and cables before removal, and back up the program. Switch off power and follow the system instructions for replacement. Recording the original arrangement now is easier than reconstructing it from memory later.
For a used digital output board, ask for all eight channels to be tested with suitable loads. Agree on the test voltage and current; one working channel or a row of lit LEDs does not establish the condition of the whole board.
OtomasyonAVM resources and PDFs
+ About Siemens S5 PLCs · S5-115U PDF archive. Manufacturer S5-110A and S5-110S manuals covering this model appear below.
Related topics
+ 410-7FA11 · 410-0AA41 · 415-7AA31 · 415-7AB11 · 417-7AA21
Browse SIMATIC S5
+ S5 digital output modules · SIMATIC S5 · S5 90/110 modules · Used digital I/O modules · Siemens second-hand equipment