6ES5 374-1KK21
Siemens 6ES5 374-1KK21 SIMATIC S5 1 MB Short Flash EPROM Memory Card
The Siemens 6ES5 374-1KK21 is a 1 MB, short-format MC 374 memory card for SIMATIC S5. It uses nonvolatile 5 V only Flash EPROM. The Siemens manual for the S5-115U CPU 945 lists the card with WORD (16-bit) organization and specifies PG software V6.6 or later.
In a CPU 945, the card holds the STEP 5 control program. In a supported IM 308-C, it stores the station and fieldbus configuration prepared in COM PROFIBUS. The two hosts use the same card order number for different data. Record the host and the source file type when making a backup.
How does the short 1KK21 differ from the long 2KK21?
The 374-1KG11 and 374-1KH21 are short 5 V Flash EPROM cards with 128 KB and 256 KB respectively. The 374-1FJ21 is a short 512 KB Flash EPROM card. Check capacity and programming support against the complete card order number.
The 374-2KK21 is also a 1 MB 5 V Flash EPROM card and uses the long-format slot. Siemens lists long cards in the ordering table for the S5-155U CPU 948, for example. The 374-2AH21 is a long RAM card, while the 375-0LA21 is a 16 KB UV-erasable EPROM submodule.
What are the requirements for CPU 945 and IM 308-C?
The S5-115U CPU 945 manual lists the exact 1KK21 order number. CPU variants such as the 945-7UA11 and 945-7UA23 have their own working memory capacities. Check the backup program size against both the 1 MB card and the memory limits of the target S5 CPU.
Table G-1 in the ET 200 manual lists the 1KK21 for IM 308-C hardware release 2 or later. That table groups the code on the 512 KB row. The CPU 945 manual and the ST 50 catalog give the card’s nominal capacity as 1 MB. Check the exact IM interface order number, hardware release and COM PROFIBUS configuration together.
How do you write the card and load it into the CPU?
Prepare the CPU card on compatible PG hardware using the EPROM/EEPROM function in STEP 5. Siemens specifies the 6ES5 985-2MC11 adapter for a PG without the appropriate card slot. Flash memory is erased electrically. For an online backup from the CPU, the 734-2 PG cable is one of the available S5 connection cables.
The CPU 945 copies the card blocks into internal program memory at power-up or after an overall reset. Before an overall reset, back up the current CPU program and the live data blocks you need. For an IM 308-C card, use the COM PROFIBUS project as the source.
Editor’s note
Check the label and card length together. The 1KK21 and 2KK21 have the same capacity. Include the full order number and slot type when specifying a spare.
Read the old card before erasing it. Keep the backup with the machine name, date and order number of the CPU or IM it came from.
Record the PG software version. Check that it recognizes the 5 V Flash card before writing. Read the card back and compare the result with the source file.
Switch off power before inserting or removing the CPU card. On first power-up, check which blocks loaded from Flash and verify the S5 PLC operating state.
Match the IM card to the network project. Check station addresses, module order and I/O addresses against the running COM PROFIBUS project. Verify card readability and network operation separately.
OtomasyonAVM resources and PDFs
SIMATIC S5 memory cards · Siemens S5 hardware and STEP 5 guide
OtomasyonAVM S5 system manuals and PDF archive
Related topics
374-1KH21 short 256 KB Flash · 374-2KK21 long 1 MB Flash · S5-115U CPU 945 · IM 308-C PROFIBUS-DP
S5 navigation
Siemens S5 PLC · SIMATIC S5 · S5 memory cards
External references
Siemens S5-115U CPU 945 manual, 1KK21 memory table (English PDF)
Siemens CPU 945 manual, programming a card and loading the CPU, Section 4.3.2 (English PDF)
Siemens ET 200 distributed I/O manual, IM 308-C card and hardware release, Table G-1 (English PDF)
Siemens ST 50 catalog, 1 MB memory card for IM 308-C, page 4/150 (English PDF)