6ES5 685-3AA11
Siemens 6ES5 685-3AA11 – PG 685 Upgrade, German
Siemens 6ES5 685-3AA11 is identified in product records as a German upgrade item for the PG 685 programmer. It relates to the PG 685 platform used for SIMATIC S5 maintenance. Assessing an upgrade to a PLC programming system requires the order scope and the existing programmer’s hardware revision to be considered together.
The manufacturer’s complete parts list and applicable hardware revisions for this exact code have not been verified. A particular processor, RAM capacity, operating system conversion or performance increase therefore cannot be assigned as a confirmed feature. Keep the 6ES5 685-0UA11 PG 685 and the upgrade order distinct; placement among S5 accessories and expansion modules does not establish technical compatibility.
Separate programmer, upgrade and software orders
6ES5 685-1AA11 and 685-3AA11 are different order numbers. Siemens also lists the 6ES5 885-0SA11 S5-DOS ST basic software package separately for the PG 685; it should not be assumed to form part of this upgrade. Compare the actual offer with a written list of boards, media and documentation.
Other system and software orders, including 6ES5 894-0MA02-0UG4, 6ES5 895-4SF11 and 6ES5 815-0UA12, must be assessed against their own platforms and purposes. A shared Siemens or STEP 5 description does not establish an identical product or a shared delivery scope.
Information required for compatibility checks
For PLC programming software selection, record the programmer’s complete order number, installed hardware, startup system information and software version. Include the target S5 CPU number. Support for every S5 CPU group or additional functions cannot be inferred from the upgrade description alone.
Check S5 cables, interface hardware and any communication modules separately. The general Siemens S5-DOS/ST manual describes an active 20 mA TTY interface for PLC connection and V.24/TTY conversion where required. This general guidance does not establish that a particular converter is included with 685-3AA11.
Archives and peripheral equipment
Preserve the programmer’s project archive separately from the application held on S5 memory modules. Accessories such as 6ES5 695-0AA11 have their own host compatibility requirements; do not assume that they are supplied with this upgrade.
When reviewing peripherals such as 6ES5 686-4AA11, check the connection and media format separately. Siemens discusses processing PCP/M files under MS-DOS as a separate topic in its S5-DOS/ST manual. Failure to read an old disk on a different system does not by itself establish damaged media; preserve the original before attempting formatting or write operations.
Record programmer startup, software startup, sample project opening and reading from a suitable test CPU as separate acceptance checks. See About Siemens S5 PLC for system background. Keep the observed results with the complete PG and CPU identification.
Editor’s Note
When buying an upgrade as used Siemens equipment, establish the complete supplied contents first. Ask for photographs of the package label, board numbers, any media and the installation document. Match the evidence to your programmer’s revision before relying on a general “fits PG 685” description.
Preserve project archives and system media before changing a working programmer. Keep available symbols, comments and project files in addition to blocks read from the PLC. A record of the original working arrangement makes later troubleshooting easier.
If a processor or memory replacement is claimed, request the board number and applicable installation instructions. Treat capacity and speed claims as unconfirmed until matched to the exact kit documentation. A single board offered for sale does not establish a complete upgrade set.
Ask for a demonstration showing the software version and the opening of a sample project, beyond a startup photograph. German menus or documentation do not establish compatibility between every software release and every PG 685 hardware revision.
Prefer a separate test CPU for the final check and record reading and comparison results first. Avoid starting acceptance tests by writing to the running machine application. Document the changed item, test system and result so that the next technician can work from clear evidence.
OtomasyonAVM resources and PDFs
+ 6ES5 685-0UA11 PG 685 · 6ES5 885-0SA11 software package · About Siemens S5 PLC
+ Shared SIMATIC S5 PDF archive – S5-115 PDF files. The manufacturer documents below cover the general programming environment; they do not replace the exact 685-3AA11 parts list or installation instructions.
Related topics
+ 6ES5 685-1AA11 · S5 cables and connectors · S5 memory modules
Browse SIMATIC S5
+ S5 accessories and expansion modules · Siemens SIMATIC S5 · Used Siemens equipment