6ES5 535-3MA12
Siemens 6ES5 535-3MA12 CP 535 SINEC H1 Communications Processor
The Siemens 6ES5 535-3MA12 is a CP 535 communications processor that connects S5-115U and S5-135U stations to SINEC H1 in the SIMATIC S5 range. This order number is listed with a 15 V module. SINEC H1 runs at 10 Mbit/s over a 50 Ω triaxial backbone.
The S5 communications module moves data between the PLC CPU and other stations. A machine can use SEND/RECEIVE to exchange data or FETCH/WRITE for remote reads and writes. The related 6ES5 535-3LB12 is the CP 535 variant listed without the 15 V module.
SINEC H1 cabling and termination
Siemens shows the 3MA12 connected through a 6ES5 727-0AA11 backbone cable, a 6GK1901-0AA00-0AA0 bus coupler and a 6ES5 727-1BD20 drop cable to the CP. When identifying S5 cables, record the backbone and drop cable part numbers separately.
Check the label on the installed SINEC H1 transceiver to identify the type. Each triaxial segment requires 50 Ω termination at both ends. If several stations drop out together, check the backbone and its terminators.
Communications services and COM 535 configuration
The CP 535 supports SEND/RECEIVE, active and passive FETCH/WRITE, and PG/OP access over ISO transport. An S5 cabinet may also contain a CP 530 for SINEC L1 or a CP 544 for point-to-point communications. Use the order numbers and network drawing to identify the connections assigned to the CP 535.
Back up the COM 535 project before replacement. Record Ethernet addresses, local and remote TSAP values, active or passive connection roles, and job numbers. If an S5 memory module is fitted, include its order number in the service record.
S5-115U rack, adapter and power supply
The Siemens S5-115U module table lists a 4 A load on the 5 V rack rail, a fan and a mounting adapter for the CP 535. The layout depends on the S5 rack. The manual shows separate layouts for the CR 700-0LB11 and CR 700-2LB11. The CR 700-2LB drawing shows the 6ES5 491-0LB11 adapter casing. Check the drawing for double-width clearance and the adjacent slot.
Check each S5 power supply by its full order number. Siemens excludes the CP 535 from use with specified 3 A supplies such as the 6ES5 951-7NB13 because they lack the DSI signal.
Where the 15 V module fits in an S5-135U
The Siemens S5-135U manual shows a 15 V module fitted in the power supply for CP 535 operation. The 6ES5 955-3LF12 is one of the supplies in that table. The 6ES5 956-0AA11 is listed separately as a 15 V module for CP 535 power supplies. Use the applicable table to check the installed supply and module and the combined current limit for the 24 V and 15 V rails.
Editor’s note
Check the 3MA12 suffix on the label. When buying a used unit, ask for a separate photo confirming whether the 15 V module is included.
Document the rack before removal. Photograph the slot number, adapter label, fan arrangement and power supply label. The S5 system and documentation page is a starting point for finding rack manuals.
Find out how much of the network is affected. If one station drops out, start with its drop cable, coupler and CP indicators. If several stations drop out, inspect their shared H1 segment.
Open the COM 535 backup before replacing the card. During commissioning, test one of the plant’s SEND/RECEIVE or FETCH/WRITE jobs with the partner station.
Ask what was tested. For a used Siemens module, ask whether the seller checked power-up and whether they tested data exchange over H1. To offer a unit for sale, email the full part number, quantity, condition, label photo and asking price to otomasyonavm@gmail.com.
OtomasyonAVM resources and PDFs
SIMATIC S5 communications modules and Siemens S5 system information and manuals
OtomasyonAVM SIMATIC S5-115 PDF archive
Related topics
6ES5 535-3LB12 CP 535, variant without the 15 V module
6ES5 956-0AA11 15 V supply module for the CP 535
6ES5 727-1BD20, 3.2 m H1 drop cable
Browse the S5 range
Siemens SIMATIC S5 PLCs › S5 communications modules · S5-90U and S5-115U
External references
Siemens S5 migration guide, CP 535 services and SINEC H1 wiring example
SIMATIC S5-115U system manual, CR 700-2LB mounting diagram · CP 535 current and mounting table · DSI restriction for 3 A supplies
SIMATIC S5-135U system manual, power supplies and 15 V module
Siemens SINEC H1 triaxial network manual
Siemens COM 552 manual, CP 535 configuration example using COM 535