6ES5 526-3LF01
Siemens 6ES5 526-3LF01 CP 526-2 Monochrome Display Communications Processor
The Siemens 6ES5 526-3LF01 is a CP 526-2 basic board that drives an operator display in a SIMATIC S5 installation. Used with the S5-115U, S5-135U, S5-150U and S5-155U, this version is designed for S5-DOS and requires forced rack ventilation. It has one 75 Ω monochrome video output, one 20 mA TTY port shared by the PG and process keyboard, and one 373 RAM/EPROM slot.
The S5 communications module builds operator screens from PLC CPU process data and accepts commands from a process keyboard. The related 6ES5 526-3LF11 is for color monitors. The 6ES5 526-3LG01 is a monochrome basic board designed for natural ventilation.
Monitor and process keyboard connections
The monochrome output carries BAS composite video on a single BNC connector. Siemens specifies a 0.3 V sync component and a 0.7 V picture component into 75 Ω. Match the monitor input and scan settings to the installation. When checking S5 cables, trace the video and keyboard leads separately.
The 15-pin TTY port accepts either a programming device (PG) or a process keyboard. The manual specifies 9,600 bit/s for the PG and 2,400 bit/s for the keyboard. Listed leads for MP20/30/40 keyboard installations include the 6ES5 736-2CB00 (10 m) and 6ES5 736-2CC00 (20 m).
Display project and 373 memory
Screens are configured in COM GRAPH and loaded into the CP’s 373 memory submodule. S5 memory modules come in several capacities, including the 373-0AA41 32 KB EPROM and 373-0AA61 64 KB EPROM. Before replacing the board, record the fitted module’s full part number, its RAM or EPROM type, and the project backup.
The CP exchanges data with the PLC when its front selector is in RUN. If the screen works but values stay static, check the CP selector, the CPU status and the project’s data handling blocks.
Rack, fan and power supply requirements
Siemens lists a 2.2 A load on the 5 V rack rail for the CP 526 basic board. The CP 526 manual specifies up to 240 mA on the 24 V rail with the process keyboard connected. Check the 3LF01 fan requirement when working out the S5 rack power budget.
The S5-115U manual shows the basic board in slots 0–2 on the CR 700-0LB11 and slots 0–5 on the CR 700-2LB11. The CR 700-2LB diagram shows the CP 526 basic board with a 6ES5 491-0LB11 adapter casing. Check the exact PS 951 power supply order number. Siemens rules out the listed 3 A models, including the 6ES5 951-7NB13, for CP 526 operation because they lack the DSI signal.
Editor’s note
Read the suffix on the label. The 6ES5 526-3LA01 is also a forced-cooled monochrome CP 526. Match the board and display project by the full order number before buying a replacement.
Keep separate CP and CPU backups. Before removal, save the COM GRAPH project and record the 373 module label and jumper positions.
Start with the video path if the screen is blank. Check monitor power, the BNC connection and the CP’s RUN, STOP and fault LEDs. If the start screen appears, verify that a live PLC value updates as well.
Document the adapter and fan before removal. Photograph the slot number, adapter label and fan position. The Siemens S5 system and documentation page provides further rack information.
Ask what was tested. For a used Siemens board, confirm whether the video output, keyboard input and PLC data exchange were tested. To offer a board for sale, send the full part number, quantity, condition, label photo and asking price to otomasyonavm@gmail.com.
OtomasyonAVM resources and PDFs
SIMATIC S5 communications modules and Siemens S5 system information and manuals
OtomasyonAVM SIMATIC S5-115 PDF archive
Related topics
6ES5 526-3LF11, forced-cooled color CP 526-2
6ES5 526-3LG01, naturally ventilated monochrome CP 526
6ES5 736-2CB00, 10 m process keyboard cable
Browse the S5 range
Siemens SIMATIC S5 PLCs › S5 communications modules · S5-90U and S5-115U
External references
Siemens 6ES5 526-3LF01 data sheet
Siemens COROS CP 526 manual, PG/keyboard and video connections · Power requirements and system limits
SIMATIC S5-115U system manual, CR 700-2LB mounting diagram · PS 951 power supply restrictions
6ES5 526-3LF01 part listing, connections and 373 memory slot