6ES5 526-3LA11

Siemens SIMATIC S5 6ES5 526-3LA11 CP 526 Color Graphics Processor

The Siemens 6ES5 526-3LA11 is a forced-air-cooled CP 526 basic board for color process monitors in the SIMATIC S5 range. The S5-135U hardware list identifies this exact order number among its communications processors. The serial interface is rated at 20 mA TTY, 50–9,600 bit/s. The board takes process values and alarm messages from the PLC and presents them on the operator’s display.

Operators use the process keyboard to call up screens and enter setpoints where the project allows. The similar-looking 6ES5 526-3LA01 also needs forced airflow, but drives a monochrome monitor. The 6ES5 526-3LB01 is monochrome, while the 6ES5 526-3LG11 is a self-ventilated color version. Check the monitor, memory and project requirements separately for the color CP 526-2 3LF11.

Color monitor connection

The Siemens manual for the color CP 526 family shows four front BNC connectors for R, G, B and S. Video output impedance is 75 Ω. Depending on the monitor, sync runs on the separate S line or is combined with green. Check the installed monitor’s label, sync input and cable ends before reconnecting.

Process keyboard and programming device

The CP 526 family diagram shows a shared 15-pin TTY socket for either the programming device or the process keyboard. The S5-135U hardware list identifies the 6ES5 982-2AA11 as a CP 526 process keyboard. Check the TTY wiring when choosing from the S5 cables and connectors. The connector shell alone does not identify the interface.

What do the 3LA21 and 3LA22 add?

The 6ES5 526-3LA21 and 6ES5 526-3LA22 are separate graphics expansion boards fitted alongside the color basic board. They provide trend curves and extended user memory. Siemens lists a memory submodule limit of 128 KB for the 3LA21 and 256 KB for the 3LA22. Those limits apply to the expansion boards.

Rack, airflow and project checks

On an S5-135U installation, read the full codes for equipment such as the 185-3UA11 expansion rack and 955-3LC13 power supply from the cabinet drawings. Record the board’s slot and the airflow path. For a move to another rack, check the rack, adapter and expansion board positions against the CP 526 family slot table.

The Siemens family manual also covers S5-115U, S5-150U and S5-155U layouts. The S5-115U CR 700-3 central rack and ER 701-3 expansion rack have different slot rules. Check the S5 rack power supplies and fan arrangement against the installed rack.

Before removing the board, archive the COM GRAPH project and record the version running on the machine. Read the installed S5 memory submodule code and identify whether it is EPROM or RAM. The Siemens family manual warns that RAM contents may be lost when the board is pulled from the rack.

Editor’s note

When ordering a spare, photograph the 526-3LA11 label and the front BNC sockets. Match the suffix, monitor type and cooling arrangement.

Isolate power before removal and record the rack code, slot and fan position. Check the filter, fan operation and airflow around the board.

Label the R, G, B and S cables individually. If colors look right but the picture rolls, check the monitor sync connection first.

For a blank screen, check monitor power and the video connection before checking the CP. If the screen works but the keys do not respond, check the process keyboard and TTY cable separately.

If possible, test a used board with a color monitor, process keyboard and saved screen project. Record the codes of any fitted graphics expansion board and memory submodule.

OtomasyonAVM resources and PDFs

+ SIMATIC S5 communications processors

+ SIMATIC S5 cables and connectors

+ SIMATIC S5-115U PDFs and system manuals

Related topics

+ 6ES5 526-3LA01 forced-air-cooled monochrome CP 526

+ 6ES5 526-3LA21 graphics expansion board · 6ES5 526-3LA22 graphics expansion board

+ 6ES5 982-2AA11 process keyboard

S5 navigation

+ SIMATIC S5 · Siemens S5 PLC · Used Siemens automation

External references

+ Siemens CP 526 manual · Color monitor connection, §3.10.4.1

+ Siemens CP 526 manual · Rack and slot table, §3.7

+ Siemens CP 526 manual · Graphics expansion board, §4.4.3

+ S5-135U hardware list · 526-3LA11 and process keyboard (ES)

+ ADEGIS · 6ES5 526-3LA11 order number