6ES5 982-2AA11

Siemens 6ES5 982-2AA11 – PBT 982 Alphanumeric Process Keyboard

Siemens 6ES5 982-2AA11 is a PBT 982 alphanumeric process control keyboard used in SIMATIC S5 operator systems. Its large desktop enclosure contains alphabetic and numeric key groups, 16 function keys, cursor controls and a key-operated input lock. Within the Siemens operator equipment range, it provides command and data entry for process displays.

The manufacturer's manual describes connection to CP 526 and operation with CP 525 through a DS 075/3975 display unit. When assessing S5 communication processors, consider the connected CP, cable and application together. CP 526 family pages such as 6ES5 526-3LA11 and 6ES5 526-3LF11 provide related system context; verify the exact board revision separately.

The CP 551 manual also lists 6ES5 982-2AA11 by its complete order number as an optional process keyboard. This entry for 6ES5 551-3UA11 CP 551 does not establish direct connection to every CPU socket in the Siemens S5 family. Select the interface and cable arrangement from the connected processor's documentation.

Key groups and operator functions

The 16 function keys are arranged in two rows of eight. Alongside the alphanumeric section are numeric keys, decimal point, minus sign, cursor controls, data transfer and abort controls. In an HMI or operator panel application, the machine command assigned to a key depends on the connected system's display and application configuration.

Supply and current for each connection

For CP 526 connection, the specified supply is +24 V DC, +25%/−10%, with a current of 180 mA. For DS 075/3975 connection, it is +5 V DC, ±5%, and 250 mA. These figures belong to different connection arrangements. Identify the correct connector and cable circuit before applying power.

The specified desktop dimensions are height 48/23.5 mm, width 490 mm and depth 234 mm. Weight is approximately 1.5 kg, protection IP54, operating temperature 0 to +40 °C, and storage/transport temperature −40 to +70 °C. Inspect the actual condition of the enclosure and seals when assessing used equipment.

TTY interface and dedicated connecting cable

The CP 526 connection uses serial TTY, 20 mA current loop. The keyboard's own lead must not be treated as a direct CP 526 connecting cable. The manual specifies a suitable cable from the 6ES5 727-2…0 family and describes arrangements up to 200 metres. When selecting S5 cables and connectors and S5 auxiliary equipment, check the complete length code, power path and connector assignments together.

The keyboard manual's automatic CP 526 initialization is 2400 baud, 8 data bits, even parity and 2 stop bits. CP 525 operation through DS 075 uses a different interface and character frame. Check model and version differences before copying communication settings from another keyboard.

Settings, addressing and input lock

Internal DIL switches relate to transmission speed, character frame and enabling the alphanumeric key group. Record the existing positions before changing them. The mapping between keys, process commands and data areas must be assessed through the PLC program and connected CP application. Back up the relevant project and settings using suitable programming software before maintenance.

The manufacturer specifies input lockout with the key switch vertical and keyboard release with it horizontal. Check this position first if the unit rejects entries. When reviewing PLC system access and security, consider this switch together with the application's other access controls.

An automatic self-test runs during startup. The green LED indicates power status; a flashing red LED indicates an error detected during self-test. A green LED alone does not verify every key or successful communication. During PLC and operator system troubleshooting, check key detection, the serial connection and application input acceptance separately.

Related models and used equipment checks

6ES5 982-2AB12 is a related alphanumeric keyboard order number. Compare key layout, character codes, interface, supply and application requirements before selecting a replacement. Do not transfer dimensions or key specifications from smaller numeric PBT 982 models to the 982-2AA11.

When buying used operator equipment, testing only a few frequently used keys is insufficient. Check the alphabetic group, numeric group, cursor keys and all 16 function keys. For used Siemens automation equipment, establish whether the key, connecting cable and connector fasteners are included.

If modernization is planned, touchscreen HMI panels and Derell HMI panels may be assessed as project options. Display functions, key commands and existing S5/CP communication must then be mapped again. These product groups must not be presented as direct plug-in replacements for the PBT 982.

Editor's Note

Start by recording the label, connecting cable and existing internal settings. Keep the CP 526's 24 V arrangement separate from the DS 075's 5 V arrangement. A similar-looking connector does not establish a correct connection.

If the numeric keys work but the letters do not, do not replace the keypad immediately. Remember that the alphanumeric group can be disabled by a setting. Check the input lock and existing DIL settings before testing the keys individually.

Do not finish the test when the green LED comes on. Check letters, numbers, cursor controls and all 16 function keys on an appropriate test display. A key acknowledgement sound and the correct action on screen are separate checks; verify both.

For intermittent missing characters, inspect the cable, connector seating, supply voltage drop and serial settings as well. Back up the working installation before copying another unit's switch positions. Incorrect settings can make a healthy keyboard unusable.

Before buying a spare, confirm that the key, correct 727 connecting cable and connector fasteners are available. An IP54 marking does not prove that an aged or damaged enclosure still provides its original protection. A complete key test and communication with the actual system provide the most useful reassurance.

OtomasyonAVM resources and PDF archive

Siemens 6ES5 982-2AA11 main page · Used Siemens S5 models · OtomasyonAVM S5 PDF archive

The exact-model technical table is in the E89100-A503-U11-B PBT 982 Operating Manual section. The English Siemens file below contains several manuals: the PBT 982 section starts on PDF page 180, and its technical table is on PDF page 188. The CP 551 document is in German.

Related topics

6ES5 982-2AB12 · CP 526 – 6ES5 526-3LA11 · CP 551 – 6ES5 551-3UA11 · Derell HMI panels

Navigation

SIMATIC S5 · Siemens operator equipment · S5 cables and connectors · Used HMI equipment

External references

Siemens PBT 982 Operating Manual – exact-model technical data, printed page 1-8 (English).

Interface initialization, printed page 1-6 · CP 526 connection and 727 cable, printed page 3-1.

Siemens CP 526 Manual – keyboard/programmer interface, section 3.10.3 (English) · Siemens CP 551 – 6ES5 982-2AA11 accessory entry, printed page 4-3 (German).