6ES5 312-5AA31

Siemens 6ES5 312-5AA31 — IM 312 Central Expansion Interface, 0.95 m

The Siemens 6ES5 312-5AA31 is an IM 312 interface module for centralized expansion in SIMATIC S5 systems. It has a permanently attached 0.95 m connecting cable. This S5 interface module is the version for an expansion unit positioned beside the main unit.

The module connects EG 180/181 expansion units in the rugged “A” construction. Review S5 rack selection together with the mechanical layout. The local expansion branch can originate from a central controller or a suitable EG 182-3A expansion unit.

Connection with the IM 300

The 312-5 is fitted on the EG 180/181 side. Depending on the supplying unit's construction, the partner interface is an appropriate IM 300 such as the 6ES5 300-5AA12 or 6ES5 300-5CA11. Siemens separately illustrates connections from compact controllers such as the S5-130W to rugged expansion units.

This arrangement provides bus access to the expansion units. Match the slot/address arrangement for the SIMATIC S5 central unit and connected digital input modules to the existing system documentation. Replacing the interface does not increase the CPU's address or program capacity.

Cable length and installation layout

95 cm is the length of the cable attached to the 312-5AA31. When reviewing S5 cables and connectors, distinguish that length from the clear distance between units and from the total expansion-chain cable length.

The 6ES5 312-5AA13 is catalogued with a 30 cm cable and the expansion unit above the main unit. The 312-5AA31 provides 95 cm for side-by-side placement. Select by the complete order number and intended cable route, as well as the IM 312 family name.

Other 312 order numbers, including the 6ES5 312-3AB11, 6ES5 312-5CA12 and 6ES5 312-5CA22, should not be treated as equivalents without verifying the rack and connection arrangement. Check cable length, connector and equipment construction separately.

Centralized and distributed connections

The IM 310 — 6ES5 310-5AA12 and IM 301 — 6ES5 301-5AA13 belong to distributed expansion arrangements. The IM 312-5AA31 serves local, centralized expansion. Different connection types within one system do not make the modules interchangeable in function.

The centralized arrangement in Siemens Catalog ST 53, 1985 specifies up to four EG 180/181 units and up to 2 m total cable length to the last expansion unit. This is not permission to repeat 0.95 m cables indefinitely; assess the complete installation against its equipment documentation.

Supply, installation and inspection

Include the total consumption of connected expansion units and modules when reviewing the S5 power supply. Inspect the cable and connectors for signs of heating, loose contacts or corrosion.

Check rack contacts, grounding and shield connections together. Preserve the existing routing and supports to maintain noise immunity. Do not force the attached cable into the layout by stretching it, making sharp bends or adding splices.

Change the module with system power switched off. During PLC debugging, if an entire expansion group is unavailable, inspect the common interface, cable, connectors and supply path before investigating individual I/O boards.

Editor's note

Pay particular attention to the 5AA31 suffix and 95 cm cable. Photograph the old label and cable route before removal, so you have something more reliable than a remembered measurement.

If the cable will not reach, resist giving it another pull. The connector may stay put while the internal connection suffers. First check that the layout suits this version.

If all the boards in an expansion rack disappear, do not assume they have all failed together. Start with the shared connection and supply; give the sound boards a fair chance.

On a used module, inspect the attached cable and end connector as carefully as the board. Where possible, see it working with suitable main and expansion units. Appearance alone is not a functional test.

After replacement, record which modules belong to each rack. Keep a small connection sketch with the S5 system information; it saves time for you and the next person maintaining the installation.

OtomasyonAVM resources and PDFs

+ Browse the OtomasyonAVM S5 PDF archive and S5 interface modules for related resources.

+ For the exact order number and cable length, see Siemens Catalog ST 53, 1985 — printed page 9/3, PDF page 121. Connection arrangements appear in 2/9, 3/8–3/9 and 3/20. The manufacturer documents below are in German.

Related topics

+ IM 300 — 300-5AA12 · IM 300 — 300-5CA11 · IM 312 — 312-5AA13 · EG 182-3A expansion unit.

+ IM 310 — 310-5AA12 · IM 301 — 301-5AA13 · S5 racks.

Browse SIMATIC S5

+ S5 interface modules · S5 cables and connectors · SIMATIC S5 systems.

+ Siemens S5 main page · Used Siemens automation equipment.

Siemens and external references

+ Siemens Catalog ST 53, 1985 — German, archived by ADEGIS: includes May 1985 amendments; exact 312-5AA31 order number, 95 cm cable and side-by-side arrangement.

+ Siemens SIMATIC S5 operating instructions — German document view at ManualsLib: viewer page 21 shows the EG 180/181 cable table and the 312-5AA31 / 95 cm entry.