6ES5 956-0AA11

Siemens 6ES5 956-0AA11 – 15 V Auxiliary Supply Module for CP 535

Siemens 6ES5 956-0AA11 is a 15 V DC auxiliary supply module for SIMATIC S5 systems. It fits inside a suitable S5 power supply unit to provide the additional supply. The Siemens S5-135U manual identifies this exact number as the 15 V module required in installations using CP 535. Assess the main power supply number together with the installed communications hardware when selecting the part.

Role in CP 535 and SINEC H1 systems

The module completes the supply arrangement required by the S5 communications hardware. When comparing CP 535 numbers such as 6ES5 535-3LB11, 6ES5 535-3LB12 and 6ES5 535-3MA12, establish how the existing system obtains its 15 V supply. The CP 535 family name alone does not establish an identical auxiliary supply requirement for every variant.

Power supply matching and current budget

The Siemens S5-135U spare parts section lists 956-0AA11 alongside power supplies 6ES5 955-3LC13, 6ES5 955-3LF11, 6ES5 955-3NA11 and 6ES5 955-3NC12. Read the complete installed unit number, revision and internal connection arrangement. Do not transfer input and output ratings between different 955 power supply versions.

The 15 V and 24 V output loads must be considered together. The S5-135U supply table specifies a combined current limit of 0.8 A or 2.8 A, depending on the applicable power supply. These figures are not independent output current options for 956-0AA11. Check the current budget against the technical data of the actual main power supply.

Related number and supplied contents

For power supply and used power supply offers, establish whether the delivery covers the 15 V auxiliary board alone or a complete 955 unit. 6ES5 956-0AA12 is a separate order number in the same functional group. Do not decide interchangeability from similar numbering alone; compare connector construction, mounting position and documentation for the installed unit.

Installation and operating checks

The module occupies a dedicated position inside the power supply rather than a normal peripheral slot in the S5 rack. Identify the chassis containing the interface hardware and S5 CPU system, then follow the relevant power supply installation instructions. Install the auxiliary module only with power disconnected. Remove and reseat the main supply according to its own manual.

During an industrial communication fault, CPU operation alone does not confirm a healthy 15 V supply. Check the supply at the specified test points and observe its behaviour with the communication load operating. For Siemens S5 PLC maintenance, record measured values together with the power supply and CP numbers.

Editor’s Note

When buying a board as used Siemens equipment, request clear photographs of the full label and both sides. Inspect darkened areas, corrosion, damaged connections and previous solder repairs closely. A clean appearance does not establish correct operation under load.

If CP 535 communication fails, establish where this installation obtains its 15 V supply before condemning the communications processor. A missing or collapsing auxiliary supply can make a healthy communications board appear faulty.

Do not finish the test after an unloaded voltage reading. In a suitable test arrangement, check voltage drop, ripple and abnormal heating with the load connected. Record which power supply and load were used rather than reporting only that the board works.

Photograph connector orientation and connections before removing the old part. Establish whether screws and connecting parts shown among the power supply accessories are included. Avoid applying external voltage to unidentified pins during testing.

Continue observation after the system has warmed up, checking both supply and communication. Inspect the fan, airflow path and connector contacts as well. Correct the operating conditions alongside the board to help prevent a recurring fault.

OtomasyonAVM resources and PDFs

+ Shared SIMATIC S5 PDF archive – S5-115 PDF files. Assess this part using the S5-135U power supply, auxiliary 15 V module and CP 535 supply descriptions together.

Related topics

+ 6ES5 956-0AA12 · 6ES5 535-3LB11 · 6ES5 535-3LB12 · 6ES5 535-3MA12 · 6ES5 955-3LF11

Browse SIMATIC S5

+ S5 power supplies · S5 communications modules · S5 racks and chassis · Siemens SIMATIC S5

Siemens and external references

+ Siemens S5-135U manual compilation – Russian. The central controller supply table footnote and the parts list on printed page 38 confirm the 6ES5 956-0AA11 number.

+ Siemens S5-135U Programmable Controller Manual – English. Central controller supply table and auxiliary 15 V module installation section. This edition lists 956-0AA12 in its ordering information; the document above provides the exact 0AA11 reference.