6ES5 605-0UA11

Siemens 6ES5 605-0UA11 — PG 605U handheld programmer

Siemens 6ES5 605-0UA11 is the German version of the PG 605U handheld programmer for Siemens S5 control systems. Its two-line display supports STEP 5 statement-list (STL) inspection, instruction entry and maintenance checks on SIMATIC S5. The controller connection uses a serial TTY current-loop interface.

For PLC programming and service work on older machines, identify the complete order number. The 0UA11 and 0UA12 versions have different connection requirements. Select the programmer together with the intended CPU, cable and adapter.

CPU compatibility and power

Siemens’ compatibility table lists 0UA11 operation without a 984 line adapter on S5-100U, S5-101U and S5-115U. An S5-90U or S5-95U requires 6ES5 984-1UA31 or 6ES5 984-1UA41. Identify the S5 CPU family and exact controller number, such as the S5-100U CPU 100, before planning the connection.

The programmer receives 5 V through the PLC connecting cable. Check the connector and pin assignment of the S5 cable; do not apply the cabinet power supply’s 24 V output to the programmer socket. Match the interface hardware by its specification rather than connector shape.

Do not apply direct-connection information for 6ES5 605-0UA12 to the 0UA11. For S5-90U/95U maintenance, availability of the correct adapter is part of the purchasing decision.

Block buffer and program changes

The temporary buffer holds one block of up to 1023 statements. Edits must be transferred to become effective in the PLC. Calling another block overwrites the previous buffer; unplugging the PG erases its own memory. Manage project backups and S5 memory-card contents as separate records.

Before editing, record the block number, original instruction and intended change. During PLC debugging, distinguish the displayed copy from the version running in the CPU. Read the changed block back afterwards and compare it with the maintenance record.

Status observation and field checks

STATUS, STATUS VAR and ISTACK support program and fault investigation. Compare a displayed digital input with the sensor’s physical state, and a digital output with the load’s response. On combined I/O modules, record the tested address alongside the terminal number.

FORCE VAR changes values. It can operate connected valves or contactors, so identify the affected load before testing. For analog modules, interpret raw values using the module range and program scaling; a single displayed number does not establish that a module is healthy.

Printer connection, physical specifications and versions

The manual lists 6ES5 984-1UA11 for printer connection and specifies an S5-101U restriction for 6ES5 984-1UB11. Distinguish printer adapters from the 984 line adapters required for S5-90U/95U connection.

Dimensions are 120 × 45 × 200 mm (W × H × D), weight approximately 0.9 kg, operating temperature +5…+40 °C and protection rating IP50. There is no water protection; keep the unit away from wet or oily work surfaces.

Some documented functions depend on the software version. Compare the required functions with the version shown at startup. Check other handheld programmers, such as the PG 615, against their own connection and operating documentation.

Editor’s note

When buying used Siemens equipment, start with a readable label photograph. “It is a PG 605” is not enough: check the 0UA11 suffix and the full numbers on every included cable and adapter.

For an S5-90U or S5-95U, settle the adapter requirement before purchasing. A working display on a different controller does not establish compatibility with your machine using the same setup. Ask for a demonstration on the intended CPU family where possible.

Before unplugging, check where the latest change is stored. Do not treat the programmer’s temporary buffer as a permanent backup. Complete the transfer and readback, then document the change for whoever maintains the machine next.

Record missing display characters, unreliable keys and connection losses when the cable moves as separate symptoms. Use the documented display and keypad checks. A startup screen alone does not verify every function.

Do not make writing an output your first test. Identify the address, connected load and expected machine response first. Afterwards, restore normal program control and verify the final field condition.

For legacy S5 maintenance, a useful purchase includes the correct connection equipment and a clear test record. Record which CPU and functions were tested, and identify anything left untested.

OtomasyonAVM resources and PDFs

+ Siemens S5 PDF archive: system and module manuals. The manufacturer’s PG 605U manual is linked under external references below.

+ 6ES5 605-0UA11 model page and used Siemens S5 models: the model and other devices in the system.

Related topics

+ 6ES5 605-0UA12 and 6ES5 615-0UA11: other handheld programmers; verify their connection requirements separately.

+ 6ES5 984-1UA11 and 6ES5 984-1UB11: compare adapter numbers and documented applications.

+ S5 cable types and PLC debugging: connection and maintenance checks.

Browse SIMATIC S5

Siemens S5 · S5 expansion products · S5 memory cards · Second-hand Siemens products

Siemens and external references

+ Siemens PG 605U Manual — EWA 4NEB 810 1056-02d, English. Table 1-1: 0UA11/0UA12 compatibility; Chapter 2: specifications and buffer; Chapter 4: operation and tests.

+ Siemens 6ES5605-0UA11 data sheet — manufacturer document hosted by SPS-Service. Exact order number, two-line display and German version.

+ Siemens S5-100U System Manual — EWA 4NEB 812 6120-02b, English. Appendix B: programmers and order numbers.