6ES5 930-7AA12

The Siemens 6ES5 930-7AA12 is a PS 930 power supply for the SIMATIC S5-110A. It takes a 220 V AC input and supplies 5.2 V DC at 0.9 A to the controller’s internal 5 V rail. This version has an integral mains interference filter.

In the SIMATIC S5 110A configuration, the supply powers the 900 CPU and the internal circuitry of the I/O cards. The connection is made through the PS position on the S5 mounting rack. The plug-in 910 memory module fits into the CPU.

220 V AC input, frequency and fuse

Siemens rates the input at 220 V AC, 50 Hz, with a voltage tolerance of −15% to +10%, giving an input range of 187–242 V AC. The permitted frequency range is 47–63 Hz and the rated input current is 80 mA. The primary fuse is specified as T 0.15 A, time-delay.

At rated output current, the manual specifies a permissible voltage dip duration of less than 3 ms. If the controller stops intermittently, compare any recorded voltage drops at the cabinet input with the CPU stop times.

Internal 5 V rail and field power

The PS 930 supplies 5.2 V to the internal CPU and I/O circuits. Siemens specifies a separate field supply for external devices such as sensors, contactors and valves. The 931-7AA11, for example, provides 24 V DC at 0.8 A from a 220 V AC input.

The PS 930 front-panel LED indicates that the 5 V supply is present. If the fault affects only a group of digital inputs or digital outputs, check the field supply for that group separately.

Programmer connection and related PS 930 versions

Figure 32 of the S5-110A manual shows the 7AA12 in an online configuration with the 500 programmer interface. The same manual covers the 330 test module separately for single-step testing.

The 6ES5 930-7AA11 is another 220 V AC version. The 6ES5 930-7AA21 takes 115 V AC. The 6ES5 930-7AA31 takes 24 V DC and supplies 5.2 V DC at 0.7 A. Check the full order number, input supply and internal 5 V load when selecting a spare.

Editor’s note

Record the 7AA12 suffix. The 7AA11 also takes a 220 V AC input. Make sure the service photo shows both the complete order number and the output current.

Check the input range on a cabinet marked 230 V. Compare the cabinet supply with the 187–242 V AC range in the manual. The voltage variation at the site matters as much as the nominal label.

Log the supply and CPU indicators together. Record the PS 930’s 5 V LED and the CPU’s STOP indication at the same time. Note whether the fault is confined to one expansion unit.

Isolate symptoms that appear during programming. If the problem occurs only when a programmer is connected, record the interface order number and the S5 connecting cable, then compare the setup with the manual diagram.

Ask for the load-test conditions. When buying a used PLC power supply, confirm the exact code of the unit tested and what load was applied when the 5.2 V output was measured.

OtomasyonAVM references and PDF archive

Browse the Siemens S5 PLC section for model pages and the OtomasyonAVM S5 PDF page for published S5 documentation. The S5-110A manual containing the 7AA12 specifications is linked under External references.

Related topics

See the S5 90/110 module index for CPU, interface and I/O references.

Site navigation

Siemens Automation › Siemens S5 PLC › S5 power supplies

External references

Siemens SIMATIC S5-110A Operating Instructions (English PDF) · Section 1.4 covers supply ratings and Section 2.5 covers connections.

Siemens 6ES5930-7AA12 product data sheet (PDF) · Exact order number and input and output ratings.